We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular card reader with keypad, ABS plastic finish, two-colour LED and buzzer, 86 by 86 by 20 mm

ZKTECO

ZKTECO KR102E KR102M Access Control Card Reader

SKU CH-AR7P-EXMMB

Reads 125 kHz ID cards and 13.56 MHz IC cards with Wiegand 26/34 output up to 100 m

Models: Select KR102E RFID 125khz

  • Read cards up to 15 cm away for touch-free entry
  • Operates at 125 kHz or 13.56 MHz for broad card support
  • Wiegand 26 or 34 bit output fits existing panels
  • Runs on 9–16 V DC with only 35 mA standby draw
  • ABS housing with epoxy fill resists water and tampering

ZKTECO KR102E/M Card Reader

The ZKTECO KR102E and KR102M are access-control card readers designed for office and commercial entry systems. They read EM4100 ID cards or S50-compatible IC cards at 125 kHz or 13.56 MHz frequencies. The units output Wiegand 26-bit or 34-bit data with a maximum transmission distance of 100 metres. A built-in keyboard allows PIN entry alongside card authentication.

Check Power and Wiring Before Installing

Verify that your controller accepts Wiegand 26-bit or 34-bit signals and supplies 9 V to 16 V DC. The reader draws 35 mA static and 45 mA peak current, with a 70 mA maximum rating. Confirm the output port setting: the KR102E defaults to 26-bit while the KR102M defaults to 34-bit. Ensure cable runs do not exceed the 100-metre Wiegand limit and that the mounting surface accommodates the 86 mm by 86 mm footprint.

Suits Standard Door Access Projects

This reader suits installers needing a compact, waterproof unit with dual-frequency card support and keypad input for single-door control. It is not suited for buyers who require long-range hands-free reading beyond 15 cm or those needing encrypted OSDP communication instead of Wiegand. Projects requiring multi-door controllers or biometric verification should look at other product types.

Highlights

  • Read cards up to 15 cm away for touch-free entry
  • Operates at 125 kHz or 13.56 MHz for broad card support
  • Wiegand 26 or 34 bit output fits existing panels
  • Runs on 9–16 V DC with only 35 mA standby draw
  • ABS housing with epoxy fill resists water and tampering

Specifications

No published specifications for this item yet.

Other versions of this model

4 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the KR102E or KR102M come with mounting hardware or a power supply, or do I need to buy those separately?

The reader is supplied as a standalone unit; mounting screws and a 12 V DC power source are not included and must be sourced separately.

Should I choose the KR102E with 26-bit default Wiegand or the KR102M with 34-bit default Wiegand for my controller?

Select KR102E if your panel expects 26-bit Wiegand by default, or KR102M for 34-bit default; both models can be switched to the alternative bit length.

What does the 100 metre Wiegand transmission distance mean when the reader is installed on a real door?

It indicates the maximum cable run between the reader and the controller using standard Wiegand wiring; actual reliable distance depends on cable quality and electrical noise.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.