We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular wall-mounted terminal with 2.4-inch color screen and fingerprint sensor

ZKTECO

ZKTECO F19 biometric fingerprint access control terminal

SKU CH-PQM0-Y2WHE MPN F19

Biometric fingerprint terminal stores 3,000 templates and 100,000 logs with 2.4-inch colour display and TCP/IP connectivity

Mode: Select F19+WIFI

  • Fast one-second user recognition with fingerprint or card
  • Stores 3,000 fingerprint templates and 100,000 transaction logs
  • 4-inch colour TFT LCD screen displays fingerprint images
  • TCP/IP and RS232 communication for flexible network integration
  • Multiple authentication modes: fingerprint, card, PIN or combinations

Biometric fingerprint access terminal

The ZKTECO F19 is a standalone biometric terminal designed for office access control and time-attendance tracking. It authenticates users via fingerprint, optional RF card or PIN in under one second. The unit stores 3000 fingerprint templates, 10000 card records and 100000 transaction logs. It connects to networks using TCP/IP or RS232 and integrates with electric locks, door sensors and exit buttons.

Low-power indoor operation

The terminal runs on standard low-voltage supply typical for access-control panels and draws minimal current during idle and verification. No active cooling is required so the device operates silently in reception areas or corridors. The optical sensor and colour TFT screen remain responsive during continuous daily use without thermal throttling or audible noise.

Wall-mount housing with wired interfaces

A tamper-proof switch triggers an alarm if the enclosure is opened, while built-in alarm contacts support dismantlement, threat and forced-entry alerts. Connectors for electric lock, door sensor, exit button and alarm output are grouped on the rear for straightforward cable routing. The 2.4-inch colour screen guides finger placement to improve recognition rates. Optional MF card reader expands credential support without changing the mounting footprint.

Highlights

  • Fast one-second user recognition with fingerprint or card
  • Stores 3,000 fingerprint templates and 100,000 transaction logs
  • 4-inch colour TFT LCD screen displays fingerprint images
  • TCP/IP and RS232 communication for flexible network integration
  • Multiple authentication modes: fingerprint, card, PIN or combinations

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I mount the F19 and wire the electric lock, door sensor, alarm and exit button, and what step is often missed?

Mount the unit, connect each access-control interface to its labelled terminal, then link the device to the network via TCP/IP or RS232; the step often missed is configuring the Wiegand output on the third-party panel so the F19 can operate standalone or with that panel.

Which consumable or component will need replacement first on the F19?

The ZKOptical Sensor fingerprint reader is the only moving optical part; with heavy daily use its scanning surface wears before the 3,000-template memory or 100,000-log storage fills.

What limit appears first when the F19 runs continuously at a busy entrance?

The 100,000-transaction log fills before the 3,000 fingerprint templates or 10,000 card records, so log offloading becomes the first maintenance task under sustained use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.