We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black rectangular box with F-type connectors on each end

Zinwell

Zinwell SUP2400 B-Band Converter 1650-2150 MHz handheld pcs accessory

SKU CH-GAG2-WRXBZ

Converts Ka-band satellite signals from 250-750 MHz to 1650-2150 MHz for DirecTV HR20, H20, H21, H24, HR21, HR22 and HR24 receivers in non-SWM installations

  • ColorBlack
  • FeaturesUniversal
  • Converts Ka-band 250-750 MHz to 1650-2150 MHz for HD channel access
  • Works with HR20, H20, H21, H24, HR21, HR22, HR24 receivers
  • Tool-free installation between dish and receiver for immediate signal transformation
  • One F-type output and one female input for simple cabling
  • Not required with SWM equipment, avoids unnecessary hardware

Satellite Signal Converter

The Zinwell SUP2400 B-Band Converter translates Ka-band satellite signals into a frequency range that compatible DirecTV receivers can process. It is intended for subscribers with non-SWM installations who need one converter per tuner to access additional HD channels. The unit installs inline between the dish cable and the receiver without tools.

Passive Operation

As a passive component the converter draws no external power and adds no audible noise to the system. It accepts signals in the 250 to 750 MHz Ka-band and outputs them in the 1650 to 2150 MHz range for the tuner. The single F-type female input and F-type male output connect directly to standard coaxial cables.

Non-SWM Installations

This converter is required for legacy DirecTV hardware such as the HR20, H20, H21, H24, HR21, HR22 and HR24 receivers when a SWM multiswitch is not present. It is not compatible with SWM-equipped systems where the conversion is handled internally. The black plastic housing is designed for indoor use near the receiver.

Highlights

  • Converts Ka-band 250-750 MHz to 1650-2150 MHz for HD channel access
  • Works with HR20, H20, H21, H24, HR21, HR22, HR24 receivers
  • Tool-free installation between dish and receiver for immediate signal transformation
  • One F-type output and one female input for simple cabling
  • Not required with SWM equipment, avoids unnecessary hardware

Specifications

BrandZinwell
ModelSUP2400
Part NumberSUP2400
ColorBlack
FeaturesUniversal

Questions about this item

How do I install the SUP2400 between the dish and my HR20 without tools?

Connect the dish cable to the F female input, then run a short coaxial lead from the F output to the receiver's satellite-in port; the converter draws power through the coax so no separate supply is needed.

What maintenance or replacement will the SUP2400 need over time?

The unit has no user-serviceable parts; if signal quality drops, check all F connectors for corrosion and replace the converter only if the Ka-band translation 250-750 MHz fails.

What limit appears first during sustained use of the SUP2400?

The 1650-2150 MHz output bandwidth is the hard ceiling; any transponder outside that range cannot be passed to HR20, H20, H21, H24, HR21, HR22 or HR24 tuners.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.