ZIBOO
ZIBOO NTN 7912C Single Angular Contact Ball Bearings 60x85x13mm
Single angular contact ball bearing measuring 60 by 85 by 13 millimetres
- Precision angular contact handles combined loads
- 60 mm bore fits standard shaft sizes
- 85 mm outer diameter matches housing specs
- 13 mm width allows compact assemblies
ZIBOO NTN 7912C bearing for precision assemblies
The ZIBOO NTN 7912C is a single angular contact ball bearing measuring 60x85x13mm. It suits electricians and mechanics who need a new, high-precision rolling element for motor rebuilds or spindle repairs where axial load capacity in one direction is required.
Straightforward press-fit installation
Installation is a standard press fit using a bearing driver or sleeve that contacts the inner ring only. Common issues arise when force is applied to the outer ring or cage, which can damage the raceways or misalign the contact angle. Ensure the shaft and housing seats are clean and within tolerance before fitting.
Highlights
- Precision angular contact handles combined loads
- 60 mm bore fits standard shaft sizes
- 85 mm outer diameter matches housing specs
- 13 mm width allows compact assemblies
Specifications
| Brand | ZIBOO |
|---|---|
| Model | NTN 7912C |
Questions about this item
How can I verify the NTN 7912C bearing is functioning correctly after installation?
Rotate the inner ring by hand; it should turn smoothly without grinding or excessive play. Listen for quiet operation and monitor for unusual heat during the first run.
What comes in the box with the NTN 7912C and what must I source separately?
The box contains the single 60x85x13mm angular contact ball bearing. You will need to supply the correct shaft and housing fits, lubricant, and any retaining rings or seals required for your assembly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
