We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red angular contact ball bearing in box packaging

ZIBOO

ZIBOO NTN 7214C Angular Contact Ball Bearing 70x125x24mm

SKU CH-9ZP0-9KV62

Angular contact ball bearing sized 70x125x24mm for combined radial and axial loads

  • TypeTest Equipment
  • Color/FinishRed
  • Item Count1 pack
  • Selling UnitBox
  • Parts3 Years
  • Labor1 Year
  • Precise 70x125x24mm dimensions fit exact assemblies
  • Angular contact design handles combined radial and axial loads
  • NTN 7214C model ensures consistent manufacturing quality
  • Red finish allows quick visual identification in inventory
  • Single pack in box simplifies ordering and storage

NTN 7214C Angular Contact Ball Bearing

The ZIBOO NTN 7214C is a precision angular contact ball bearing built for electricians and technicians who need reliable rotational performance in test equipment and power-tool applications. Its 70x125x24mm dimensions suit shafts and housings that require this exact envelope.

Installation and common issues

Press the bearing onto the shaft using a sleeve that contacts only the inner ring to avoid brinelling the raceways. Ensure the housing bore is clean and within tolerance so the outer ring seats squarely. Misalignment or contamination during fitting are the most frequent causes of premature noise and reduced service life.

Practical limits of the bearing interface

The angular contact design supports combined radial and axial loads in one direction, so the bearing must be mounted with the correct thrust face orientation. It is not suited for reversing thrust loads or for applications that exceed the internal clearance without preload adjustment. High-speed operation demands proper lubrication and alignment to prevent overheating.

Highlights

  • Precise 70x125x24mm dimensions fit exact assemblies
  • Angular contact design handles combined radial and axial loads
  • NTN 7214C model ensures consistent manufacturing quality
  • Red finish allows quick visual identification in inventory
  • Single pack in box simplifies ordering and storage

Specifications

BrandZIBOO
ModelNTN 7214C
TypeTest Equipment
Color/FinishRed
Item Count1 pack
Selling UnitBox
Parts3 Years
Labor1 Year

Questions about this item

How can I confirm the NTN 7214C bearing is seated correctly after installation?

Verify smooth rotation by hand and check for axial play within the 24 mm width tolerance; the 70 mm inner and 125 mm outer diameters should sit flush without binding.

What components are included in the box for the ZIBOO NTN 7214C and what must be sourced separately?

The box contains one NTN 7214C angular contact ball bearing; mounting hardware, lubricant and any required seals or spacers are not included and must be purchased separately.

Which NTN 7214C version should I choose for a 70 mm shaft and 125 mm housing bore?

The 7214C designation matches a 70 mm inner diameter, 125 mm outer diameter and 24 mm width, so this single listed version fits those dimensions directly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.