ZIBOO
ZIBOO NTN 6818 ZZ Deep Groove Ball Bearings 90x115x13mm
Deep groove ball bearing measuring 90 by 115 by 13 millimetres, supplied in a single pack
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Precise 90x115x13mm fit for accurate alignment
- Shielded ZZ design resists contamination ingress
- Deep-groove geometry handles radial and axial loads
- NTN 6818 ZZ model ensures OEM interchangeability
- Red finish allows quick visual identification
ZIBOO NTN 6818 ZZ Bearing Specifications
The ZIBOO NTN 6818 ZZ is a deep groove ball bearing supplied as a single pack in a box. It suits maintenance engineers and electricians who need a direct replacement for worn bearing units in motors, pumps or gearboxes. The red finish aids visual identification during inventory checks and assembly.
Sustained Load Behaviour
Under continuous rotation the bearing maintains consistent rolling contact between the 90 mm inner diameter and 115 mm outer diameter races. The ZZ shields retain factory grease and exclude contaminants, preserving smooth operation over extended duty cycles without relubrication intervals. Performance remains stable at the 13 mm width design envelope.
Thermals Noise And Power Draw
Normal operation generates minimal frictional heat due to precision raceway geometry and shielded lubrication. Acoustic output stays low because the deep groove design minimises vibration transmission through the housing. No external power is consumed; the component simply transmits mechanical energy with negligible losses.
Highlights
- Precise 90x115x13mm fit for accurate alignment
- Shielded ZZ design resists contamination ingress
- Deep-groove geometry handles radial and axial loads
- NTN 6818 ZZ model ensures OEM interchangeability
- Red finish allows quick visual identification
Specifications
| Brand | ZIBOO |
|---|---|
| Model | NTN 6818 ZZ |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
How much heat does the 6818 ZZ generate during continuous operation?
The sealed deep-groove design runs cool under normal radial loads; no forced cooling is required.
What shaft and housing sizes must I already have for the 90x115x13 mm bearing?
A 90 mm shaft and a 115 mm housing bore with standard tolerances are needed for a proper press fit.
Will the 13 mm wide 6818 ZZ replace the open 6818 in my existing motor?
Yes, the identical 90 mm bore and 115 mm OD allow direct swap; the ZZ shields add contamination protection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
