ZIBOO
ZIBOO NTN 6412 ZZ Deep Groove Ball Bearings 60x150x35mm
Deep groove ball bearing measuring 60 by 150 by 35 millimetres for rotary motion support
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Precision deep-groove design for smooth rotation
- Shielded ZZ seals keep contaminants out
- 60x150x35 mm dimensions fit standard housings
- NTN 6412 ZZ model ensures consistent quality
- Red finish allows quick visual identification
Industrial Deep-Groove Ball Bearings
The NTN 6412 ZZ units are precision-engineered rolling elements built for electricians and maintenance crews who need reliable radial-load handling in motor, pump or gearbox rebuilds. Each box contains a single bearing pack finished in a red coating for quick visual identification on the bench. The 60 mm inner diameter, 150 mm outer diameter and 35 mm width suit standard metric housings found in industrial power-tool servicing.
Sustained Load Behaviour
Under continuous rotation the double metal shields keep lubricant in and contaminants out, reducing wear during extended duty cycles typical of conveyor drives or compressor shafts. The deep-groove geometry distributes stress evenly across the raceways, limiting temperature rise when the bearing runs at constant speed for long shifts. Shield retention remains secure even when vibration levels increase on ageing equipment.
Dimensional Fit Limits
The fixed 60x150x35 mm envelope dictates housing bore and shaft tolerances; any deviation beyond standard metric fits will cause preload loss or excessive clearance. Axial displacement is not accommodated, so the bearing must be located against a shoulder or snap ring on both inner and outer rings. Users requiring misalignment compensation or higher axial capacity must select a different bearing type.
Highlights
- Precision deep-groove design for smooth rotation
- Shielded ZZ seals keep contaminants out
- 60x150x35 mm dimensions fit standard housings
- NTN 6412 ZZ model ensures consistent quality
- Red finish allows quick visual identification
Specifications
| Brand | ZIBOO |
|---|---|
| Model | NTN 6412 ZZ |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
How much heat or noise does the NTN 6412 ZZ bearing generate during continuous operation?
The sealed NTN 6412 ZZ deep-groove ball bearing runs quietly with low friction; normal operating temperature stays within standard limits for 60 mm bore, 150 mm outer diameter, 35 mm width bearings under rated load.
What shaft and housing dimensions must I already have for the 6412 ZZ to fit?
You need a 60 mm shaft and a 150 mm housing bore with a 35 mm wide seat to match the NTN 6412 ZZ bearing dimensions exactly.
Will the 6412 ZZ work alongside older NTN bearings I already use in the same assembly?
Yes, the 6412 ZZ shares the same 60x150x35 mm envelope and ZZ sealing as earlier NTN 6412 models, so it interchanges directly without changing spacers or seals.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
