ZIBOO
ZIBOO NTN 6317 LLU Deep Groove Ball Bearings 85x180x41mm
Deep groove ball bearing sized 85 by 180 by 41 millimetres with double contact seals
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Deep groove design handles radial and axial loads
- NTN 6317 LLU model ensures precise fit for 85 mm shafts
- 180 mm outer diameter suits heavy-duty electrician equipment
- 41 mm width provides stable load distribution
- Red finish allows quick visual identification in tool kits
NTN 6317 LLU deep-groove ball bearings
The NTN 6317 LLU is a single-row deep-groove ball bearing sized at 85 by 180 by 41 millimetres. It suits maintenance engineers and electricians who need a replacement bearing for motor shafts, gearboxes or pump assemblies. The sealed LLU design keeps lubricant in and contaminants out for longer service intervals.
Replaces worn 6317 series bearings
This unit directly replaces a 6317 bearing that shows noise, vibration or excess play. The jump is worth it when the original seal has failed or the raceways are pitted, because the new LLU seals restore the factory lubrication barrier without requiring a housing change.
Fits standard 6317 housings
The bearing drops into any housing machined for the 6317 envelope, so no shaft or housing rework is needed. It frees the technician from sourcing separate seals or snap rings, because the integrated LLU seals and standard width cover both axial location and contamination protection in one component.
Highlights
- Deep groove design handles radial and axial loads
- NTN 6317 LLU model ensures precise fit for 85 mm shafts
- 180 mm outer diameter suits heavy-duty electrician equipment
- 41 mm width provides stable load distribution
- Red finish allows quick visual identification in tool kits
Specifications
| Brand | ZIBOO |
|---|---|
| Model | NTN 6317 LLU |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
What shaft diameter fits the 85 mm bore of the NTN 6317 LLU bearing?
The bearing has an 85 mm bore, so it fits a shaft of that diameter with the appropriate tolerance for a press or slip fit.
How do I press the 6317 LLU bearing onto the shaft without damaging the seals?
Apply force only to the inner ring using a bearing driver or sleeve; never hammer the outer ring or the red LLU seals.
When should I replace the NTN 6317 LLU bearing in continuous service?
Plan replacement at the first sign of noise, vibration or seal wear; the LLU seals are lubricated for life and not re-greaseable.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
