ZIBOO
ZIBOO NTN 6315 ZZ Deep Groove Ball Bearings 75x160x37mm
Deep groove ball bearing measuring 75 by 160 by 37 millimetres with metal shields on both sides
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Precision rotation with 75x160x37mm deep groove geometry
- Shielded ZZ design keeps contaminants out of rolling elements
- NTN 6315 series engineered for high radial load capacity
- Single-box packaging delivers one ready-to-install bearing unit
- Three-year parts coverage backs long-term reliability
ZIBOO NTN 6315 ZZ Bearing for Electrician Tools
The ZIBOO NTN 6315 ZZ is a deep groove ball bearing supplied as a single pack for electrician tools. It is built for new installations or maintenance where a 75x160x37mm bearing is specified. The red finish identifies the unit in a tool kit.
Fits 75x160x37mm Mounting Dimensions Only
This bearing matches a 75 mm inner diameter, a 160 mm outer diameter and a 37 mm width. It cannot be used in housings or shafts that require different bore, outside diameter or width measurements. Verify the exact cavity size before fitting.
Shielded ZZ Design Retains Lubricant
The ZZ suffix indicates metal shields on both sides that keep grease inside and block coarse contaminants. This makes the bearing suitable for electrician tool applications where relubrication intervals are long. Open or single-shield variants will not provide the same retention.
Highlights
- Precision rotation with 75x160x37mm deep groove geometry
- Shielded ZZ design keeps contaminants out of rolling elements
- NTN 6315 series engineered for high radial load capacity
- Single-box packaging delivers one ready-to-install bearing unit
- Three-year parts coverage backs long-term reliability
Specifications
| Brand | ZIBOO |
|---|---|
| Model | NTN 6315 ZZ |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
How do I confirm the NTN 6315 ZZ is the right bearing for my application?
Check that your housing bore is 160 mm, shaft diameter is 75 mm and the available width is 37 mm; the 6315 designation matches those three dimensions exactly.
What does the 75x160x37 mm size mean once the bearing is installed?
The 75 mm inner diameter fits the shaft, the 160 mm outer diameter seats in the housing, and the 37 mm width determines the axial space the bearing occupies.
What does the ZZ suffix indicate about the bearing's sealing?
ZZ means metal shields on both sides that retain grease and block larger contaminants while allowing higher speeds than contact seals.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
