ZIBOO
ZIBOO NTN 6314 ZZ Deep Groove Ball Bearings 70x150x35mm
Deep groove ball bearing sized 70 by 150 by 35 millimetres with metal shields on both sides
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Deep groove design handles radial and axial loads
- Double ZZ shields keep contaminants out for longer life
- 70 mm bore fits standard 6314 housing dimensions
- 150 mm outer diameter matches common shaft sizes
- 35 mm width provides high load capacity
NTN 6314 ZZ Deep Groove Ball Bearing
The ZIBOO NTN 6314 ZZ is a deep groove ball bearing designed for rotational applications requiring radial load support. It suits maintenance engineers and technicians replacing worn bearings in electric motors, pumps or gearboxes. The single unit comes in a red finish and is supplied new in a box.
Sustained Load Behaviour
Under continuous operation the bearing handles steady radial forces with low friction thanks to its deep groove geometry. The metal shields on both sides retain lubricant and exclude contaminants, helping maintain consistent performance over long duty cycles without frequent re-greasing.
Dimensional Fit Limits
The bearing fits a 70 mm shaft and a 150 mm housing bore with a 35 mm width, so the surrounding components must match these exact dimensions. Axial loads in both directions are possible but limited by the deep groove design, so applications with heavy thrust forces need a different bearing type.
Highlights
- Deep groove design handles radial and axial loads
- Double ZZ shields keep contaminants out for longer life
- 70 mm bore fits standard 6314 housing dimensions
- 150 mm outer diameter matches common shaft sizes
- 35 mm width provides high load capacity
Specifications
| Brand | ZIBOO |
|---|---|
| Model | NTN 6314 ZZ |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
Does the NTN 6314 ZZ bearing generate noticeable heat or noise during continuous all-day operation?
The deep-groove design with metal shields on both sides keeps friction low, so heat and noise remain minimal even under sustained load at rated speeds.
What shaft and housing dimensions must I already have for the NTN 6314 ZZ to fit correctly?
You need a 70 mm shaft and a 150 mm housing bore to match the bearing's 70x150x35 mm envelope.
Will the NTN 6314 ZZ work alongside older NTN 6314 open or single-shield bearings in the same assembly?
Yes, the 6314 series shares identical boundary dimensions, so the ZZ version interchanges directly with older open or Z-suffix units.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
