ZIBOO
ZIBOO NTN 6019 LLU Deep Groove Ball Bearings 95x145x24mm
Deep groove ball bearing measuring 95 by 145 by 24 millimetres with dual contact seals for electrician tool applications
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Deep-groove design handles radial and axial loads
- Double-contact LLU seals retain lubricant and block contaminants
- 95 mm bore fits standard shaft dimensions
- 145 mm outer diameter matches common housing specs
- 24 mm width suits compact assembly spaces
NTN 6019 LLU Deep Groove Ball Bearings
The NTN 6019 LLU deep groove ball bearing is a precision component built for electricians and maintenance technicians who need reliable rotational performance in motor repairs and equipment servicing. Its sealed design helps protect internal rolling elements from contaminants during operation.
Replacing worn or noisy bearings
When existing bearings show increased vibration, heat or audible noise, fitting the 6019 LLU restores smooth running and extends the service interval of the host machine. The upgrade is worth it whenever the original seals have failed or the raceways exhibit pitting that cannot be cleaned.
Verify shaft and housing dimensions
Before ordering, confirm that the shaft diameter matches the 95 mm bore and that the housing bore accepts the 145 mm outside diameter with the correct 24 mm width. Also check that the LLU seal configuration suits the lubrication method and environmental conditions of your application.
Highlights
- Deep-groove design handles radial and axial loads
- Double-contact LLU seals retain lubricant and block contaminants
- 95 mm bore fits standard shaft dimensions
- 145 mm outer diameter matches common housing specs
- 24 mm width suits compact assembly spaces
Specifications
| Brand | ZIBOO |
|---|---|
| Model | NTN 6019 LLU |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
What shaft diameter does the 95x145x24mm bearing fit?
The 95 mm inner diameter matches a 95 mm shaft for a standard press fit.
How do I install the 6019 LLU bearing without damaging the seals?
Press only on the outer ring using a bearing driver or sleeve; never hammer the inner ring or the red LLU seals.
When should I replace the NTN 6019 LLU bearing in service?
Replace it when vibration, heat or noise increases beyond normal levels; the LLU seals are non-replaceable.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
