We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red self-aligning ball bearing in boxed packaging

ZIBOO

ZIBOO NTN 1314K Self Aligning Ball Bearing 70x150x35mm

SKU CH-GZW5-AHEYR

A self-aligning ball bearing with 70 mm bore, 150 mm outer diameter and 35 mm width for accommodating shaft misalignment

  • TypeTest Equipment
  • Color/FinishRed
  • Item Count1 pack
  • Selling UnitBox
  • Parts3 Years
  • Labor1 Year
  • Self-aligning design compensates for shaft misalignment
  • 70 mm bore fits standard shaft dimensions
  • 150 mm outer diameter matches housing requirements
  • 35 mm width supports axial load capacity
  • NTN 1314K model ensures reliable bearing performance

NTN 1314K Self Aligning Ball Bearing

The NTN 1314K is a self aligning ball bearing built to 70x150x35mm dimensions. It suits maintenance engineers and electricians who need reliable rotation in misaligned housings. The bearing handles radial and moderate axial loads in industrial equipment. ZIBOO supplies it as a single unit in a box.

Thermals noise and power draw

As a passive mechanical component the bearing generates no electrical noise and draws no power. Operating temperature depends on the host machine speed and lubrication rather than the bearing itself. Correct grease fill and seal condition keep running temperatures stable. No fan or active cooling is required.

70x150x35mm envelope

The 70 millimetre bore 150 millimetre outside diameter and 35 millimetre width decide fitment. Verify shaft and housing tolerances match these figures before ordering. Buyers who need a different bore or width cannot use this part. The 1314K designation confirms the boundary dimensions only.

Highlights

  • Self-aligning design compensates for shaft misalignment
  • 70 mm bore fits standard shaft dimensions
  • 150 mm outer diameter matches housing requirements
  • 35 mm width supports axial load capacity
  • NTN 1314K model ensures reliable bearing performance

Specifications

BrandZIBOO
ModelNTN 1314K
TypeTest Equipment
Color/FinishRed
Item Count1 pack
Selling UnitBox
Parts3 Years
Labor1 Year

Questions about this item

How do I press the 70 mm bore of the NTN 1314K onto the shaft without damaging the self-aligning races?

Use a sleeve that contacts only the inner ring, apply even force, and never hammer the outer ring or the 150 mm housing seat.

When should I plan to replace the NTN 1314K bearing in continuous service?

Inspect at the 3-year parts interval; replace if radial play exceeds the original clearance or if the 35 mm width shows race wear.

What is the first limit the NTN 1314K hits under sustained high-speed load?

The 70x150x35 mm geometry reaches its dynamic capacity before the self-aligning feature can compensate for misalignment.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.