ZIBOO
ZIBOO IKO TAFI9512526 Needle Roller Bearings 95x125x26mm
Needle roller bearing with inner ring measuring 95x125x26mm for precision applications
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Needle roller design handles high radial loads in tight spaces
- 95 mm inner diameter fits standard 95 mm shafts
- 125 mm outer diameter matches common housing bores
- 26 mm width distributes load across a broad contact surface
- IKO precision manufacturing delivers consistent performance for test equipment applications
IKO TAFI9512526 needle roller bearing
This IKO TAFI9512526 needle roller bearing includes an inner ring and measures 95x125x26mm. It suits mechanical assemblies that require compact radial support with high load capacity. Technicians and engineers use it in gearboxes, pumps and precision motion systems where space is limited.
Low-friction operation and sealed lubrication
The needle roller design minimises rolling resistance so running temperatures stay modest under normal loads. Sealed construction retains factory grease and excludes contaminants, keeping acoustic output low without external cooling. Power draw in the surrounding drive train is reduced because frictional losses are small.
95x125x26mm envelope with inner ring
The bearing’s 95mm bore, 125mm outside diameter and 26mm width define the only envelope that fits the housing. If the shaft or bore dimensions differ, this part cannot be installed and a different bearing size is required.
Highlights
- Needle roller design handles high radial loads in tight spaces
- 95 mm inner diameter fits standard 95 mm shafts
- 125 mm outer diameter matches common housing bores
- 26 mm width distributes load across a broad contact surface
- IKO precision manufacturing delivers consistent performance for test equipment applications
Specifications
| Brand | IKO |
|---|---|
| Model | IKO TAFI9512526 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
How do I press the 95 mm inner ring onto the shaft without damaging the needle rollers?
Use a sleeve that contacts only the 95 mm inner ring face and press slowly until the ring seats fully against the shaft shoulder.
What replacement interval applies to the IKO TAFI9512526 bearing under normal load?
Replace the complete bearing set after the 3-year parts coverage period or sooner if vibration or radial play increases.
At what point does the 26 mm width limit heat dissipation during continuous operation?
The narrow 26 mm cross-section restricts lubricant volume, so sustained high speed raises temperature until the grease film breaks down.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
