Zhazpor 42V 2A Power Adapter for VOLPAM SP06 SP05 SP03 SP02 SP20 SP08
A 42V 2A AC/DC adapter with 1.2 m cables and 8 mm/1.6 mm centre pin, UL and CE certified, for 36V lithium batteries
- TypeDC Adapter
- Changer TypeAC/DC Adapter
- SpecificationsAC/DC Adapter
- FeaturesAC/DC Adapter, For VOLPAM
- Safe charging with UL certification and over-voltage, over-current, short-circuit, over-temperature protection
- Stable 42V 2A output designed for 36V lithium battery packs
- Red LED shows charging, green LED shows full or standby
- 2 m AC and 1.2 m DC cables give flexible placement
- 8 mm / 1.6 mm centre-pin connector fits VOLPAM SP06 SP05 SP03 SP02 SP20 SP08
Zhazpor 42V 2A Power Adapter
This Zhazpor AC/DC power adapter delivers 42V at 2A for 36V lithium battery systems. It is built as a direct replacement charger for VOLPAM SP06 SP05 SP03 SP02 SP20 SP08 models. The unit carries UL and CE certification with integrated over-voltage, over-current, over-temperature and short-circuit protection. A 1.2 m AC cord and 1.2 m DC cable with an 8 mm/1.6 mm centre-pin connector are included.
Riders needing a certified 42V 2A replacement
Owners of VOLPAM SP-series scooters or other 36V lithium platforms that accept a 42V 2A input and the specified 8 mm/1.6 mm barrel will find this adapter a safe, drop-in solution. Buyers whose battery packs require a different charge voltage, a higher or lower current rating, or a connector size other than 8 mm/1.6 mm cannot use this unit.
42V 2A output with 8 mm/1.6 mm centre pin
The single specification that decides fit is the 42V 2A DC output paired with the 8 mm/1.6 mm centre-pin connector. If the original charger matches both the voltage, current and this exact connector geometry, the adapter will work; if either value or the connector differs, it will not.
Highlights
- Safe charging with UL certification and over-voltage, over-current, short-circuit, over-temperature protection
- Stable 42V 2A output designed for 36V lithium battery packs
- Red LED shows charging, green LED shows full or standby
- 2 m AC and 1.2 m DC cables give flexible placement
- 8 mm / 1.6 mm centre-pin connector fits VOLPAM SP06 SP05 SP03 SP02 SP20 SP08
Specifications
| Brand | Zhazpor |
|---|---|
| Type | DC Adapter |
| Changer Type | AC/DC Adapter |
| Specifications | AC/DC Adapter |
| Features | AC/DC Adapter, For VOLPAM |
Questions about this item
What voltage and current does the 42V 2A output actually deliver to a 36V lithium battery?
The adapter supplies a constant 42V DC at 2A, which is the standard charging voltage for 36V lithium-ion packs.
Which connector size fits the charging port on the listed VOLPAM and Ninebot models?
It uses an 8mm outer diameter barrel plug with a 1.6mm centre pin, matching the DC input on the compatible scooters.
How do you connect the charger correctly and what common mistake should be avoided?
Plug the AC cord into a 100-240V mains socket first, then insert the DC barrel into the scooter; reversing the order can trigger the over-voltage protection.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114926BTC
In stock
