YUGMCOCE PETG+ Filament Light Purple 1.75 mm 1 kg
High-speed PETG+ filament in light purple, 1.75 mm diameter on a 2.2-pound spool, prints at 30-300 mm/s with nozzle temps of 230-260 °C and bed temps of 60-70 °C for tough.
- ColorPetg Light Purple 1kg
- MaterialPolyethylene terephthalate modified with ethylene glycol
- Diameter1.75
- Weight2.2 pounds
- Prints strong functional parts with high impact resistance
- Smooth printing at 30–300 mm/s with minimal warping
- Reliable layer adhesion from 230–260 °C nozzle and 60–70 °C bed
- Tough PETG+ blend withstands indoor and outdoor use
- Precise 1.75 mm diameter on a 2.2 lb spool
Material and purpose
YUGMCOCE PETG+ is a modified polyethylene terephthalate filament designed for durable mechanical parts, holders, clamps and printer components. It combines the ease of PLA with the toughness of ABS for functional prints that must withstand impact and outdoor exposure.
Printer compatibility checklist
Confirm your hot end can reach 230-260°C nozzle temperature and your heated bed can hold 60-70°C. Ensure the extruder accepts 1.75 mm diameter filament and that your slicer can handle speeds up to 300 mm/s for high-speed profiles.
Spool handling and daily use
The 2.2-pound spool feeds cleanly on standard holders and resists moisture absorption better than many PETG blends. Strong layer adhesion reduces warping at the bed, so finished parts come off the plate with minimal post-processing and retain strength over time.
Highlights
- Prints strong functional parts with high impact resistance
- Smooth printing at 30–300 mm/s with minimal warping
- Reliable layer adhesion from 230–260 °C nozzle and 60–70 °C bed
- Tough PETG+ blend withstands indoor and outdoor use
- Precise 1.75 mm diameter on a 2.2 lb spool
Specifications
| Brand | YUGMCOCE |
|---|---|
| Color | Petg Light Purple 1kg |
| Material | Polyethylene terephthalate modified with ethylene glycol |
| Diameter | 1.75 |
| Weight | 2.2 pounds |
Questions about this item
What comes with the 1 kg PETG+ Light Purple spool and what must I buy separately?
The box contains the 1.75 mm filament on a 2.2 lb spool. You will need a 3D printer that accepts 1.75 mm material and a heated bed capable of 60-70 °C.
Which capacity should I choose for mechanical parts and outdoor use?
The 1 kg spool provides enough PETG+ for multiple brackets, clamps or printer upgrades while keeping the material fresh for the high impact strength and weather resistance this filament delivers.
What do the 230-260 °C nozzle and 30-300 mm/s speed figures mean on my printer?
They are the recommended window: set the hot-end between 230 and 260 °C, the bed at 60-70 °C, and you can print anywhere from 30 up to 300 mm/s for strong layer adhesion with minimal warping.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
