YINGHUA
YINGHUA X99 Dual-Socket Server Motherboard with 2×E5-2620 V4 CPU
Dual-socket E-ATX board with two E5-2620 V4 CPUs, eight DDR4 ECC slots up to 256 GB, eight SATA 2.0 ports and two M.2 NVME interfaces
- CPU TypeIntel Atom
- Dual-socket E5-2620 v4 CPUs provide 16 cores for parallel workloads
- Eight DDR4 slots support 256 GB ECC memory for data integrity
- Dual M.2 NVME and eight SATA 2.0 ports give flexible storage options
- Three PCI Express x16 and two x1 slots allow GPU and add-in card expansion
- Dual 100 Mbps network ports provide basic server connectivity
X99 Dual-Socket Server Motherboard with Two CPUs
This E-ATX board uses the X99 chipset and two LGA2011-3 sockets to host a pair of E5-2620 V4 processors. It includes two thermal pads and provides eight DDR4 slots running in four-channel mode. The board measures 33 by 31 centimetres.
Suits multi-threaded workloads needing dual CPUs
Builders who want a single-processor platform should consider other options. The 100 megabit onboard network limits high-throughput clustering. Only eight SATA 2.0 ports and two M.2 NVME interfaces are available for storage.
Eight DDR4 slots support up to 256 gigabytes
Four-channel architecture accepts 2133, 2400 and 2800 megahertz modules with a maximum of 32 gigabytes per slot. This capacity ceiling decides whether the board fits the planned dataset size.
Highlights
- Dual-socket E5-2620 v4 CPUs provide 16 cores for parallel workloads
- Eight DDR4 slots support 256 GB ECC memory for data integrity
- Dual M.2 NVME and eight SATA 2.0 ports give flexible storage options
- Three PCI Express x16 and two x1 slots allow GPU and add-in card expansion
- Dual 100 Mbps network ports provide basic server connectivity
Specifications
| CPU Type | Intel Atom |
|---|
Questions about this item
What case clearance does the 33 cm by 31 cm E-ATX board need?
The board measures 33 cm by 31 cm and follows the E-ATX form factor, so the chassis must support E-ATX dimensions and provide matching standoff holes.
How are the two 8-pin and one 24-pin power connectors seated during installation?
Connect the 24-pin ATX plug first, then attach both 8-pin EPS cables; the step most builders miss is fully seating the second 8-pin connector, which the board requires for dual-CPU operation.
When should the two included thermal pads for the LGA2011-3 sockets be replaced?
Replace the thermal pads whenever you reseat either E5-2620 V4 processor or if the pads show compression loss, cracking, or dried-out surfaces during routine maintenance.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



