We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with mSATA slot and USB 3.1 connectors, includes cable

YINGHUA

YINGHUA USB 3.1 to mSATA RAID Adapter Card

SKU CH-K6ZP-7YWFG

Connects mSATA SSDs via USB 3.1 with RAID support and includes a cable

  • TypePCI to USB Card
  • USB 3.1 interface enables fast data transfers
  • RAID support protects data across dual mSATA drives
  • Converter card connects mSATA SSDs to USB Type-A and Micro-B ports
  • Included cable simplifies installation for immediate use

USB 3.1 mSATA RAID Adapter

This adapter connects mSATA solid-state drives to a host system through a USB 3.1 interface. It presents the attached drives as a RAID array for combined capacity or redundancy. The card includes the necessary cable for immediate installation. It suits users who want to repurpose existing mSATA modules without a dedicated motherboard slot.

Thermals noise and power draw

The device draws power directly from the USB bus and has no active cooling. Operation is silent because there are no moving parts. Heat output remains low during typical read and write workloads. Power consumption scales with the number and activity of the installed mSATA drives.

Highlights

  • USB 3.1 interface enables fast data transfers
  • RAID support protects data across dual mSATA drives
  • Converter card connects mSATA SSDs to USB Type-A and Micro-B ports
  • Included cable simplifies installation for immediate use

Specifications

TypePCI to USB Card

Questions about this item

How do I install the YINGHUA USB 3.1 to mSATA RAID Adapter Card into my system?

Insert the card into an available PCI slot, connect the supplied cable to a USB 3.1 header or port, then seat the mSATA SSD firmly into the onboard connector.

What maintenance will the mSATA SSD installed on this adapter require over time?

The SATA SSD itself needs no scheduled maintenance; monitor its health via SMART tools and replace the drive only if errors appear or capacity runs out.

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.