YINGHUA
YINGHUA USB 3.0 to SATA Hard Drive Adapter 2.5/3.5" 12V/2A US Plug
Connects 2.5" and 3.5" SATA drives via USB 3.0 at up to 5Gbps, includes 12V/2A power adapter with US plug for 3.5" drives
- Connect 2.5" and 3.5" SATA drives via USB 3.0 up to 5Gbps
- 12V 2A power adapter included for 3.5" HDD operation
- Plug-and-play with hot-swap support across Windows, Mac and Linux
- Backward compatible with USB 2.0 and 1.1 ports
- 40 cm cable length for flexible drive positioning
USB 3.0 to SATA Adapter for 2.5 and 3.5 Inch Drives
This adapter connects a standard 2.5 inch or 3.5 inch SATA HDD or SSD to a computer through a USB 3.0 port. It supports transfer speeds up to 5Gbps and is backward compatible with USB 2.0 and 1.1. The 40cm cable includes a 12V 2A power adapter with a US plug for 3.5 inch drives. No driver installation is required for the listed operating systems.
For backup, data recovery and drive upgrades
It suits users who need quick external access to bare SATA drives for file backup, data migration or notebook drive upgrades. Hot-swap capability allows drive changes without rebooting. Buyers who require a permanent internal installation, RAID configurations or simultaneous multi-drive access should consider a dedicated enclosure or controller card instead.
12V 2A power adapter included for 3.5 inch drives
The package provides a 12V 2A AC/DC power adapter with a US plug that is mandatory when a 3.5 inch HDD is connected. A 2.5 inch HDD or SSD draws sufficient power from the USB port alone and does not need the external supply. The adapter is black and the cable length is 40cm or 15.75 inches.
Highlights
- Connect 2.5" and 3.5" SATA drives via USB 3.0 up to 5Gbps
- 12V 2A power adapter included for 3.5" HDD operation
- Plug-and-play with hot-swap support across Windows, Mac and Linux
- Backward compatible with USB 2.0 and 1.1 ports
- 40 cm cable length for flexible drive positioning
Specifications
No published specifications for this item yet.
Questions about this item
What cable length and power plug come with the YINGHUA USB 3.0 to SATA adapter?
The package includes a 40 cm cable and a US power plug for the 12V/2A adapter.
How do I connect a 3.5-inch SATA drive using this adapter?
Plug the SATA connector into the drive, attach the 12V/2A power adapter to the drive’s power port, then insert the USB 3.0 plug into the computer.
Will I need to replace the power adapter if I switch from 3.5-inch to 2.5-inch drives?
No, 2.5-inch SATA drives draw power through the USB 3.0 port, so the external 12V/2A adapter is only required for 3.5-inch drives.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



