YINGHUA
YINGHUA RFID/EM Keypad Door Lock 13.56 MHz 1000 User
Supports up to 1000 users with card, PIN, or combined entry at 13.56 MHz and 125 kHz
- TypeChain Guard
- MaterialMetal
- FunctionEntrance
- Supports up to 1000 users for flexible access management
- Operates at 13.56 MHz and 125 KHz for dual-frequency card compatibility
- Offline operation with power-off data protection keeps settings safe
- Opens via card, PIN, or card-plus-PIN for versatile entry
- Includes 10 RFID key tabs and mounting hardware for immediate setup
Standalone Access Controller
The YINGHUA RFID/EM keypad operates on 12 V DC and supports up to 1000 users with offline data protection. It accepts EM, ID and IC cards at 125 kHz or 13.56 MHz frequencies. A 5 to 15 mm read range allows quick entry via card, PIN or both combined. Master cards simplify enrolment without a connected PC.
Replaces Keyed Entry Systems
The unit removes the need for physical keys and re-keying when staff change. Adding or revoking credentials takes seconds at the keypad rather than waiting for a locksmith. The jump is worth it when a site manages dozens of users and needs audit-free access changes. It also integrates with an existing door bell circuit for visitor release.
Sustained Operation Behaviour
Continuous operation draws 0.1 A when the lock actuates and returns to idle instantly. Stored user data survives power loss without batteries or cloud sync. The metal housing resists daily handling in indoor or sheltered outdoor positions. No active cooling is required, so silent reliability is maintained across repeated cycles.
Highlights
- Supports up to 1000 users for flexible access management
- Operates at 13.56 MHz and 125 KHz for dual-frequency card compatibility
- Offline operation with power-off data protection keeps settings safe
- Opens via card, PIN, or card-plus-PIN for versatile entry
- Includes 10 RFID key tabs and mounting hardware for immediate setup
Specifications
| Type | Chain Guard |
|---|---|
| Material | Metal |
| Function | Entrance |
Questions about this item
What are the exact dimensions of the control unit so I can check it fits my door frame?
The control unit measures 120 mm by 78 mm by 22 mm and weighs 0.22 kg.
How do I wire the lock output and the door-bell connection during installation?
Connect the lock to the 12 V DC supply with a 0.1 A draw; wire the door-bell terminals either by cable or wirelessly as required.
What happens to the stored users and master cards if the power is cut?
The unit has power-off data protection, so all 1000 users and master cards remain stored without a battery backup.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
BFKK 100 Key Lock Box Wall Mount 17 x 12.99 x 3.26 Black
- Deadbolt Latches



