We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Handheld RFID duplicator with 2.9 inch colour screen, metal body, USB port and battery compartment

YINGHUA

YINGHUA RFID Copier Writer Duplicator 125KHz 13.56MHz USB Programmer door lock

SKU CH-X7F4-KRKTQ

Handheld RFID duplicator reads and writes 125 kHz and 13.56 MHz cards on a 2.9‑inch colour screen

  • TypeChain Guard
  • MaterialMetal
  • FunctionEntrance
  • 9-inch colour screen shows card data clearly
  • Reads and writes 125 kHz and 13.56 MHz frequencies
  • Supports EM4100, EM4200, Mifare, UID, NFC and HID card types
  • Powered by four AAA batteries or USB connection
  • Compact handheld design for portable on-site use

RFID Duplicator for Access Control

The YINGHUA IDICW01 is a portable RFID copier and writer that operates at 125KHz and 13.56MHz frequencies. It targets facility managers, security installers, and hobbyists who need to duplicate or programme key fobs and access cards on site. A 2.9‑inch colour screen and voice prompts in Chinese guide the user through scanning and writing steps without a PC.

Battery and USB Power With Broad Chip Support

The unit runs on four AAA batteries or via USB power, so it works at a door side or on a bench. It reads ten frequency steps from 125KHz up to 1000KHz plus 13.56MHz ISO1443A/B and HID Prox. Supported readable chips include EM4100, EM4200, Mifare Classic, Ultralight, NFC 203, 213, 215, 216 and HID 1386, 1326, 1346. Writable targets are T5577, EM4305, Mifare UID cards and HID 1386, 1326, 1346.

Suits On‑Site Duplication Not Full Encryption Bypass

This tool suits anyone who needs to clone standard low‑frequency and high‑frequency credentials quickly. Buyers who must defeat strong encryption on every card type should look elsewhere because the device cracks most but not all protected 13.56MHz cards. Users requiring a built‑in keyboard for standalone PIN entry will also need a different model.

Highlights

  • 9-inch colour screen shows card data clearly
  • Reads and writes 125 kHz and 13.56 MHz frequencies
  • Supports EM4100, EM4200, Mifare, UID, NFC and HID card types
  • Powered by four AAA batteries or USB connection
  • Compact handheld design for portable on-site use

Specifications

TypeChain Guard
MaterialMetal
FunctionEntrance

Questions about this item

How often will the four AAA batteries need changing if the copier runs all day?

Battery life depends on screen brightness and scan frequency; the unit also accepts USB power for continuous operation.

What stops a copy job first during extended use — battery drain or the 2.9-inch screen timing out?

The screen stays on while powered; the practical limit is battery capacity unless you switch to USB supply.

Does the device get hot or noisy when powered by USB for a full shift?

It has no fan and draws little current, so it runs silently and stays cool during continuous USB operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.