We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal rain cover for access control keypad, 15x10.4x9cm exterior, 13.5x8.9x8.4cm interior

YINGHUA

YINGHUA Rain Cover Waterproof Shell Black 15x10.4x9cm

SKU CH-C0HZ-XCN22

A metal rain cover that shields RFID keypads and fingerprint readers up to 13.5 by 8.9 cm inside a 15 by 10.4 cm shell

  • TypeChain Guard
  • MaterialMetal
  • FunctionEntrance
  • Protects keypads from rain with a black waterproof shell
  • Fits devices up to 13 cm long and 8.9 cm wide
  • Metal construction shields access controllers from moisture
  • Inside depth of 8.4 cm covers most RFID units
  • Outside measures 15 x 10.4 x 9 cm for secure mounting

YINGHUA Rain Cover for Access Controllers

This waterproof shell protects RFID keypads and fingerprint readers mounted at building entrances. It fits devices with an external length up to 13 cm and width up to 8 cm. The metal construction shields the electronics from rain and splashing water. Installers use it to extend the service life of outdoor access hardware.

Metal Shell Changes Installation Requirements

The rigid metal cover adds 15 cm length, 10.4 cm width and 9 cm depth to the mounting footprint. Inside, the cavity measures 13.5 cm by 8.9 cm by 8.4 cm, so the controller must be smaller than those internal dimensions. The extra bulk means a flat wall area large enough for the outer rectangle is required. No seals or gaskets are mentioned in the data.

Dimensions Limit Which Controllers Fit

Only units shorter than 13 cm long and narrower than 8 cm wide will fit inside the 13.5 cm by 8.9 cm cavity. The 8.4 cm internal depth restricts the maximum thickness of the enclosed device. Controllers exceeding any of those three limits cannot be used with this cover. Buyers needing to protect larger panels must choose a different enclosure.

Highlights

  • Protects keypads from rain with a black waterproof shell
  • Fits devices up to 13 cm long and 8.9 cm wide
  • Metal construction shields access controllers from moisture
  • Inside depth of 8.4 cm covers most RFID units
  • Outside measures 15 x 10.4 x 9 cm for secure mounting

Specifications

TypeChain Guard
MaterialMetal
FunctionEntrance

Questions about this item

How often will the metal shell need repainting or corrosion treatment?

The metal shell is a passive rain cover with no moving parts or finish that degrades under normal outdoor exposure, so no scheduled repainting or corrosion treatment is required.

What device size stops fitting inside the 13.5 cm by 8.9 cm by 8.4 cm cavity?

Any controller exceeding 13 cm in length or 8 cm in width will not fit, because the internal cavity measures 13.5 cm long, 8.9 cm wide and 8.4 cm deep.

Does the cover trap heat from the keypad during continuous operation?

The metal shell acts only as a rain shield; it adds no insulation, so heat from the access controller dissipates into the surrounding air exactly as it would without the cover.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.