We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular USB NFC RFID copier with two-colour LED and five key fobs five cards

YINGHUA

YINGHUA NFC RFID Copier 13.56MHz USB Door Lock

SKU CH-XCSM-2671J

A 13.56 MHz NFC RFID reader and writer copies UID, FUID, CUID and UFUID cards via USB with LED status and buzzer alerts

  • TypeChain Guard
  • MaterialMetal
  • FunctionEntrance
  • Reads and writes 13.56 MHz NFC tags
  • USB full-speed interface for direct PC connection
  • Red and green LEDs show standby or active state
  • Built-in buzzer confirms every read or write
  • Includes five key fobs and five cards

NFC RFID Copier 13.56 MHz USB Programmer

The YINGHUA NFC RFID Copier is a 13.56 MHz USB reader-writer that duplicates UID, FUID, CUID and UFUID cards as well as most IC half-encryption and full-encryption tags. It connects through a USB full-speed interface and draws 200 mA while operating. The bundle includes five key fobs and five cards for immediate testing. Software is supplied via a download link rather than physical media.

Access control installers

This device suits installers who need to clone supported 13.56 MHz credentials on Windows 98 through Windows 10, including 64-bit editions of XP, Vista, 7 and Server 2003/2008. It is not for users who require native driver support on operating systems not listed, nor for projects that demand encryption formats outside the stated IC types. The two-colour LED and built-in buzzer give basic status feedback during read or write cycles.

USB full-speed interface at 13.56 MHz

The single specification that decides fit is the USB full-speed connection running at 13.56 MHz, which determines both host compatibility and the range of ISO14443A tags the copier can address. Power comes from the 5 V DC bus with a 50 mA standby draw and 100 mA typical current. Physical size is 108 mm by 68 mm by 12 mm, so verify clearance in your enclosure before ordering.

Highlights

  • Reads and writes 13.56 MHz NFC tags
  • USB full-speed interface for direct PC connection
  • Red and green LEDs show standby or active state
  • Built-in buzzer confirms every read or write
  • Includes five key fobs and five cards

Specifications

TypeChain Guard
MaterialMetal
FunctionEntrance

Questions about this item

What USB port must the computer provide for the 13.56 MHz RFID copier?

The device needs a USB full-speed port that can supply 5 V DC at up to 200 mA; it draws 50 mA on standby and 100 mA during normal operation.

Will the copier still read my existing ISO14443A key fobs and S50 cards?

Yes — it supports UID, FUID, CUID, UFUID and most IC half- or full-encryption cards, so standard ISO14443A fobs and S50 tags remain compatible.

How do I confirm the reader is active after plugging it in and launching the software?

The two-colour LED shows red on standby and turns green while working; the built-in buzzer also emits a beep each time a card is detected.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.