We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular circuit board with silver connectors and black components

YINGHUA

YINGHUA Main PCA Formatter Logic Board 24-IN 44-IN Z3100PS GP T1200 T1120 scanner supply

SKU CH-4NP0-69HMW

Main PCA formatter logic board for 24-inch and 44-inch DesignJet Z3100PS, T1200 and T1120 printers

  • Product TypePrinthead
  • Replaces main PCA formatter logic board for DesignJet Z3100PS GP
  • Compatible with T1200 and T1120 printer models
  • Supports 24-IN and 44-IN wide-format printing
  • Matches part numbers Q6675-60123 Q6675-60072 Q6684-60023

Main PCA Formatter Logic Board 24-IN 44-IN

This replacement main PCA formatter logic board fits HP DesignJet Z3100PS GP, T1200 and T1120 large-format printers. It is intended for service technicians and IT departments restoring printer operation after a logic-board failure. The part matches the original 24-IN and 44-IN formatter specifications for these models.

Direct board swap with connector alignment

Installation requires opening the printer electronics enclosure, disconnecting the existing formatter cables and securing the replacement board using the original mounting points. The dense connector layout demands careful alignment to avoid bent pins; mis-seated cables are the most common cause of post-install errors. This board does not support printers outside the listed DesignJet series.

Highlights

  • Replaces main PCA formatter logic board for DesignJet Z3100PS GP
  • Compatible with T1200 and T1120 printer models
  • Supports 24-IN and 44-IN wide-format printing
  • Matches part numbers Q6675-60123 Q6675-60072 Q6684-60023

Specifications

Product TypePrinthead

Questions about this item

How can I confirm the Main PCA Formatter Logic Board is functioning correctly after installing it in my DesignJet Z3100PS?

After installation, power on the printer and check that the control panel initialises without error codes, then run a test print to verify communication between the formatter and the printhead.

What comes in the box with the Main PCA Formatter Logic Board, and are any cables or mounting screws sold separately?

The board is supplied as a standalone unit; any required ribbon cables, power connectors or mounting hardware must be sourced separately if not reused from the original assembly.

More in Printer & Scanner Supplies

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.