YINGHUA M.2 to USB-C Enclosure Aluminium 5Gbps 10Gbps Silver D

M.2 SATA and NVMe dual-protocol enclosure

This aluminium enclosure accepts M.2 SSDs in 2230, 2242, 2260 and 2280 form factors with either B-key, M-key or B+M-key pinouts. It bridges SATA and PCIe NVMe drives to a USB Type-C host connection, making internal solid-state storage portable without requiring a driver installation. The silver alloy shell acts as a heatsink to draw warmth away from the drive during operation. Plug-and-play simplicity suits technicians moving data between laptops and desktops.

Build integration with included cables

Two cables are supplied: a USB-C to USB-A lead rated for 5 Gbps and a USB-C to USB-C lead rated for 10 Gbps, letting the builder match the host port and the drive protocol. SATA NGFF drives use the USB-C to USB-A cable, while NVMe drives can use either cable but reach the higher theoretical ceiling only with the USB-C to USB-C link. UASP support reduces protocol overhead compared with the older BOT transport. No external power adapter is needed, so the enclosure draws bus power and leaves the power strip free for other peripherals.

Sustained transfer behaviour under load

Theoretical limits are 5 Gbps for NGFF SATA and 10 Gbps for NVMe, but real-world throughput depends on the specific SSD, the cable chosen and the host controller performance. The aluminium body increases surface area to delay thermal throttling during long sequential reads or writes, helping the drive maintain its speed for longer periods. Without active cooling, very heavy workloads will still warm the enclosure, so sustained peak rates are not guaranteed for every drive model.