We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black aluminium M.2 SSD enclosure with Type-C port

YINGHUA

YINGHUA M.2 SSD Enclosure 10Gbps Dual Protocol Type-C Black

SKU CH-8052-K28XD

Holds M.2 NVME and SATA SSDs up to 2TB, connects via 10Gbps USB 3.1 Type-C with OTG adapter included

  • Transfer at up to 10Gbps with NVMe drives
  • Works with SATA and NVMe M.2 SSDs
  • Aluminium shell draws heat away from the drive
  • Tool-free assembly with included Type-C cable
  • Supports 2230, 2242, 2260 and 2280 form factors

What It Is

The YINGHUA enclosure turns an M.2 SSD into a portable USB 3.1 drive with a 10 Gbps Type-C link. An aluminium shell doubles as a heatsink, and the RTL9210B controller handles both NVME and SATA protocols without drivers. It fits 2230, 2242, 2260 and 2280 modules up to 2 TB.

Who It Suits

Builders who want a single tool-free case for B+M key or M key NVME and NGFF SATA sticks will find the dual-protocol support convenient. Users limited to USB 3.0 ports still get native SATA 6 Gbps performance. Buyers needing more than 2 TB per drive or a second simultaneous SSD should look elsewhere.

Deciding Spec

The RTL9210B bridge delivers 10 Gbps over USB 3.1 Type-C, but actual throughput follows the installed drive: NVME reaches the full link speed while SATA tops out at 6 Gbps.

Highlights

  • Transfer at up to 10Gbps with NVMe drives
  • Works with SATA and NVMe M.2 SSDs
  • Aluminium shell draws heat away from the drive
  • Tool-free assembly with included Type-C cable
  • Supports 2230, 2242, 2260 and 2280 form factors

Specifications

No published specifications for this item yet.

Questions about this item

Should I pick the 2230, 2242, 2260 or 2280 form factor for this enclosure?

The enclosure accepts all four M.2 lengths — 2230, 2242, 2260 and 2280 — so choose the one that matches the drive you already own or plan to buy.

What does the 10Gbps rating mean when I connect an NVMe drive to my laptop?

With an NVMe SSD the enclosure can reach up to 10Gbps over the USB 3.1 link; a SATA SSD will be limited to 6Gbps by the drive itself.

Does the Type-C port use USB 3.1 Gen 2 and what speed does that cap at?

Yes, the Type-C connector runs USB 3.1 Gen 2 at 10Gbps, so the interface ceiling is 10Gbps and the actual throughput depends on whether the installed SSD is NVMe or SATA.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.