YINGHUA
YINGHUA HDMI Audio Extractor 1080P 3.5mm Splitter
Extracts stereo audio from an HDMI signal to a 3.5 mm jack while passing 1080p video through, driver-free and powered from the source
- TypeHDMI
- Extracts stereo audio to 3.5 mm jack for headphones or amplifiers
- Passes 1080p video at 60 Hz through HDMI 1.3 compliant link
- Works instantly with no drivers or external power required
- Ultra-compact at 60 × 55 × 20 mm and only 60 g
- Includes USB cable and manual for immediate setup
Compact 1080P HDMI audio extractor
This small converter splits the audio from an HDMI source into a 3.5 mm analogue jack while passing the video signal through unchanged. It suits streamers, gamers or home-theatre users who need to feed headphones or an amplifier without a receiver that handles HDMI audio. The unit draws power from the HDMI link itself, so no external adapter is required.
Driver-free plug-and-play installation
Connect the source to the single HDMI input, run the HDMI output to the display and plug analogue speakers or headphones into the 3.5 mm port. No software or firmware steps are needed. The only common issue is a missing audio signal when the source device refuses to output PCM stereo over HDMI; switching the source audio format to stereo usually resolves it.
Limited to HDMI 1.3 bandwidth and 1080P60
The extractor passes video up to 19201080 at 60 Hz and complies with the HDMI 1.3 specification. Higher resolutions, refresh rates or advanced colour formats are not supported. It also cannot pass multi-channel audio formats such as Dolby Digital or DTS through the 3.5 mm jack — only two-channel analogue stereo is available.
Highlights
- Extracts stereo audio to 3.5 mm jack for headphones or amplifiers
- Passes 1080p video at 60 Hz through HDMI 1.3 compliant link
- Works instantly with no drivers or external power required
- Ultra-compact at 60 × 55 × 20 mm and only 60 g
- Includes USB cable and manual for immediate setup
Specifications
| Type | HDMI |
|---|
Questions about this item
How can I confirm the HDMI audio extractor is passing 1080p video correctly after plugging it in?
Connect a 1080p source and display; the unit supports up to 19201080@60Hz per the HDMI 1.3 specification, so a stable picture at that resolution shows it is working.
What comes in the box and what must I supply myself?
The package includes the main unit, a user manual and a mini USB cable; you need to provide an HDMI source, an HDMI display and a 3.5 mm audio cable for the analog output.
Which version should I choose if I only need stereo analogue audio from an HDMI signal?
This single model extracts stereo audio to a 3.5 mm jack while passing HDMI video through, so it covers that requirement without additional versions.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



