YINGHUA
YINGHUA 5.25 inch External Hard Drive Case USB 3.0 2.0 SATA DVD 16 Speed 480Mbps UK Plug
A 5.25 inch metal enclosure that converts a SATA optical drive or 3.5 inch hard disk to USB 3.0 or 2.0, supporting 16 speed DVD recording and up to 8TB capacity
- Metal shell with tool-free cover for quick drive swaps
- USB 3.0 and USB 2.0 ports for broad host compatibility
- Fits 5.25" SATA optical drives and 3.5" SATA hard disks up to 8TB
- DVD 16 speed recording at 480 Mbps data rate
- UK plug power adapter included with 12V 3A output
5.25 inch SATA drive enclosure
This aluminium-alloy and ABS enclosure converts a 5.25 inch internal bay into an external USB 3.0 or USB 2.0 docking station. It accepts a 5.25 inch SATA optical drive or a 3.5 inch SATA hard disk up to 8 TB. A UK three-pin power adapter supplying 12 V at 3 A is included. An LED indicator shows power and activity status.
Replaces internal 5.25 inch bays
The unit lets you use a DVD writer capable of 16 speed recording or a high-capacity 3.5 inch SATA drive without opening the computer case. The upgrade is worthwhile when a laptop or small-form-factor PC lacks an optical drive or free internal SATA ports. USB 3.0 provides up to 480 Mbps transfer bandwidth for the connected device.
Check bay depth and SATA cables
Verify that the target 5.25 inch bay has enough depth for the enclosure's upper and lower cover structure. Ensure a spare SATA data cable and SATA power connector are available inside the host system for the installed drive. Confirm the host operating system supports external SATA optical drives or hard disks over USB 2.0 or USB 3.0.
Highlights
- Metal shell with tool-free cover for quick drive swaps
- USB 3.0 and USB 2.0 ports for broad host compatibility
- Fits 5.25" SATA optical drives and 3.5" SATA hard disks up to 8TB
- DVD 16 speed recording at 480 Mbps data rate
- UK plug power adapter included with 12V 3A output
Specifications
No published specifications for this item yet.
Questions about this item
What bay size and drive interfaces does the 5.25 inch case accept?
The enclosure fits a standard 5.25 inch bay and supports internal SATA optical drives or 3.5 inch SATA hard disks up to 8TB capacity.
How do I connect the case to the computer and power it?
Slide the drive into the metal shell, attach the internal SATA data and power cables, then plug the external USB 3.0 or USB 2.0 cable into the PC and connect the 12V 3A adapter to a 100V 240VAC mains socket.
Which parts may need replacement after extended use?
The 12V 3A power adapter and the USB 3.0 or USB 2.0 cable are the components most likely to require replacement over time.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



