We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular KVM switch with multiple HDMI and RJ45 ports

YINGHUA

YINGHUA 4K HDMI KVM Switch 2x6 Cat5e/6 100M 2 Loop-out 4 RJ45

SKU CH-P6HR-HR5G1

Routes two 4K HDMI sources to six displays over Cat5e/6 up to 100 m with two loop-outs and four RJ45 extender ports

  • TypeHDMI
  • Switch two sources across six displays with 4K at 30 Hz support
  • Extend HDMI signals up to 100 m over Cat5e or Cat6 cable
  • Four UTP extension ports for remote receiver units
  • Two loop-out ports mirror the source locally
  • HDMI 1.4 and HDCP 1.4 compliance for protected content

2-in-6-out 4K HDMI matrix

The YINGHUA 4K HDMI KVM Switch routes two HDMI sources to six destinations using Cat5e or Cat6 cabling. It delivers video up to 4K at 30 Hz and also handles 720p and 1080p formats. Two local loop-out ports provide direct monitoring at the switch location. Four RJ45 outputs extend signals to remote receivers sold separately.

Replaces separate splitters and extenders

A single unit combines switching, splitting and long-distance extension that would otherwise require multiple boxes and power supplies. The jump is worth it when source equipment and displays are separated by up to 100 metres over structured wiring. Buyers who only need local splitting without extension do not need the optional receivers.

Stable 4K30 delivery over 100-metre runs

HDMI 1.4 and HDCP 1.4 compliance maintains handshake integrity across the full cable distance. Signal quality holds at 4K 30 Hz without dropout when paired with Cat6 and the matching receiver units. The architecture is built for continuous operation in installed AV systems rather than brief demonstration loops.

Highlights

  • Switch two sources across six displays with 4K at 30 Hz support
  • Extend HDMI signals up to 100 m over Cat5e or Cat6 cable
  • Four UTP extension ports for remote receiver units
  • Two loop-out ports mirror the source locally
  • HDMI 1.4 and HDCP 1.4 compliance for protected content

Specifications

TypeHDMI

Questions about this item

What cable type and maximum distance does the 4-channel RJ45 UTP extension support?

The four RJ45 ports extend 4K HDMI over Cat5e or Cat6 cable up to 100 metres per run.

How is the switch connected to the displays, and what common step is missed?

Connect the two HDMI sources to the host inputs, then link each RJ45 output to a compatible 4K receiver unit; the separate receivers are often forgotten.

Which component will need replacement first in a permanent installation?

The external 4K RJ45 receiver units at each display are the items most likely to require replacement over time.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.