YINGHUA
YINGHUA 4K 30Hz HDMI Splitter 1x8 KVM Switch 1080P
Distributes one HDMI source to eight displays at 4K 30Hz and 1080p
- TypeHDMI
- One source drives eight displays simultaneously
- 4K output at 30 Hz for sharp visuals
- 1080p resolution supported on every connected screen
- USB power cable included for simple setup
1×8 HDMI Splitter for Multi-Display Setups
This 1×8 HDMI splitter takes a single source signal and duplicates it across eight displays. It supports 4K resolution at 30 Hz and 1080P output for broad compatibility. The unit suits installers, presenters and enthusiasts who need identical video and audio on multiple screens simultaneously.
USB Power Cable Included for Simple Deployment
A USB power cable is bundled so the splitter can draw power from the source device or any standard USB port without a dedicated mains adapter. This reduces cable clutter and lets the unit work in tight rack or desk spaces where a wall-wart would not fit.
Highlights
- One source drives eight displays simultaneously
- 4K output at 30 Hz for sharp visuals
- 1080p resolution supported on every connected screen
- USB power cable included for simple setup
Specifications
| Type | HDMI |
|---|
Questions about this item
Does the splitter need any firmware updates or internal batteries replaced over time?
The unit has no firmware interface and no internal battery; it draws power from the included USB cable and operates passively once connected.
At what resolution does the 30 Hz limit become the bottleneck when driving all eight displays?
The 30 Hz ceiling applies at 4K resolution; at 1080P the same bandwidth headroom allows higher refresh rates if the source supports them.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



