YINGHUA
YINGHUA 4K 200M HDMI IP KVM Extender AU Plug 1TX 1RX
Extends 4K 30 Hz HDMI, USB keyboard and mouse up to 200 m over Cat5e/6 with support for 16 units on one network
- TypeHDMI
- Extends HDMI up to 200 metres over Cat5e/6
- Supports 4K resolution at 30Hz refresh rate
- Allows up to 16 units on one network
- Plug-and-play hardware with no software required
- Includes USB mouse and keyboard extension
YINGHUA 4K HDMI IP KVM Extender
The YINGHUA 4K HDMI IP KVM extender transmits video, audio and USB control signals up to 200 metres over a single Cat5e or Cat6 cable using standard TCP/IP networking. It supports resolutions up to 4K at 30Hz and stereo audio at 32, 44.1 or 48 kHz sample rates. The set includes one transmitter and one receiver with AU power adapters.
Verify network and cabling before ordering
Ensure your infrastructure uses Cat5e or Cat6 cabling and standard Ethernet switches compliant with the 802.3 standard. The system operates in point-to-point, multipoint-to-multipoint or cascade modes, so confirm the desired topology matches your switch capabilities. Power outlets must accept the supplied AU plug format.
Fits into IP-based KVM matrix deployments
Up to 16 extender sets can operate on the same network, enabling multi-user access to remote computers from a centralised location. USB keyboard and mouse signals travel alongside video, while RS232 and 38 kHz IR pass-through handle auxiliary device control. The hardware-only design requires no host software installation.
Highlights
- Extends HDMI up to 200 metres over Cat5e/6
- Supports 4K resolution at 30Hz refresh rate
- Allows up to 16 units on one network
- Plug-and-play hardware with no software required
- Includes USB mouse and keyboard extension
Specifications
| Type | HDMI |
|---|
Questions about this item
Does the box include both the transmitter and receiver, or must one be purchased separately?
The listing states that the transmitter and receiver are sold separately, so you need to order both units to complete a link.
Which resolution should I choose if my display is limited to 1080p at 60 Hz?
The extender supports 480p, 720p, 1080p and 4K at 30 Hz, so 1080p is fully supported and will work at its native refresh rate.
What does the 200 m distance rating mean when the extender is connected through a standard network switch?
The 200 m figure is the maximum single Cat5e/6 cable run between a transmitter and a receiver; cascading through a switch lets multiple extenders share the same network without reducing that per-link limit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



