YINGHUA
YINGHUA 150M HDMI KVM Extender with AU Plug
Extends HDMI and USB keyboard-mouse control up to 150 metres over Cat5e/6 cable with 1080p 60 Hz support and HDCP 1.4 compliance
- TypeHDMI
- Transmit HDMI up to 150 metres over Cat5e/6 cable
- Extend keyboard and mouse control alongside video
- Support 1080p 60 Hz and HDCP 1.4 content
- Plug-and-play point-to-point setup with no configuration
- IEEE 802.3 Ethernet standard for stable long-range link
YINGHUA 150M HDMI KVM Extender
The YINGHUA 150M HDMI KVM Extender transmits HDMI and USB signals up to 150 metres over a single Cat5e or Cat6 cable. It supports 1080P resolution at 60Hz and HDCP 1.4 compliance. The unit includes an AU plug and operates as a plug-and-play transmitter and receiver pair without configuration.
Suits installers needing long-distance PC
This extender suits installers who need to place a keyboard, mouse and monitor far from a PC or DVR using standard Ethernet cabling. It is not for users who require 4K resolution, multi-monitor support or switching between multiple sources. Buyers needing HDMI 2.0 bandwidth or fibre-based transmission should consider other solutions.
150 metre range over Cat5e/6 cable
The maximum transmission distance is 150 metres using Cat5e or Cat6 cable following the IEEE-568B wiring standard. The system delivers a maximum baud rate of 4.5 Gbps and supports input and output resolutions of 480P, 720P and 1080P. Verify that your cabling meets the distance requirement before purchase.
Highlights
- Transmit HDMI up to 150 metres over Cat5e/6 cable
- Extend keyboard and mouse control alongside video
- Support 1080p 60 Hz and HDCP 1.4 content
- Plug-and-play point-to-point setup with no configuration
- IEEE 802.3 Ethernet standard for stable long-range link
Specifications
| Type | HDMI |
|---|
Questions about this item
What type of cable and maximum length does the 150M extender require between the transmitter and receiver?
The extender uses a single Cat5e or Cat6 cable following the IEEE-568B standard, with a maximum transmission distance of 150 meters.
How is the HDMI KVM extender set up for point-to-point operation?
Connect the transmitter to the source via HDMI and USB, link the receiver to the display and peripherals, then run one Cat5e or Cat6 cable between the two units; no configuration is needed.
What video resolutions and refresh rate does the extender support for ongoing use?
It supports 480P, 720P and 1080P input and output at 60 Hz, with HDCP 1.4 compliance and a maximum bandwidth of 150 MHz.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



