Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00920526BTC
In stock
YINGHUA
YINGHUA 13.56Mhz RFID Reader USB Sensor door lock
USB plug-and-play RFID reader reads Mifare S50/S70 cards at 13.56 MHz up to 8 cm distance
- TypeChain Guard
- MaterialMetal
- FunctionEntrance
- Driver-free USB reader works instantly on Windows and Android
- Reads Mifare S50 and S70 cards from up to 8 cm
- Built-in buzzer and LED confirm every scan
- 5 m cable gives flexible desk or wall mounting
- Compact 9.7 × 6.1 × 1 cm metal housing fits tight spaces
13.56 MHz RFID USB Reader
This 13.56 MHz RFID reader connects via USB and reads Mifare S50 and S70 cards at up to 8 cm distance. It works driver-free on Windows, Linux and Android, outputting the card number directly into any text field. The device draws 70 mA from a 5 V supply and includes a 1.5 m cable.
Metal Housing with Integrated Buzzer and LED
The reader measures 9.7 by 6.1 by 1 cm and weighs 50 g, housed in a metal shell suited to indoor mounting. A built-in buzzer and LED give immediate audible and visual confirmation of each successful read. The fixed 1.5 m USB cable determines placement relative to the host computer or OTG-capable phone.
Replaces Stand-Alone Keypads or Proprietary Modules
It upgrades installations that currently rely on keypad codes or closed-protocol readers by adding standard 14443A card support without new wiring. The jump is worthwhile when you need plug-and-play enrolment across Windows 98 through Windows 8, Linux or Android and can accept the 1.5 m cable reach.
Highlights
- Driver-free USB reader works instantly on Windows and Android
- Reads Mifare S50 and S70 cards from up to 8 cm
- Built-in buzzer and LED confirm every scan
- 5 m cable gives flexible desk or wall mounting
- Compact 9.7 × 6.1 × 1 cm metal housing fits tight spaces
Specifications
| Type | Chain Guard |
|---|---|
| Material | Metal |
| Function | Entrance |
Questions about this item
What USB standard does the 13.56 MHz RFID reader use and what baud rate does it cap at?
The reader uses a USB 1.5 m cable for plug-and-play connection and communicates at a fixed 9600 baud rate.
What physical space and mounting does the 9.7 × 6.1 × 1 cm reader need?
The reader measures 9.7 × 6.1 × 1 cm and connects via a 1.5 m USB cable; it requires a free USB-A port and a flat surface for the card to sit on top.
How do I install the reader and what step do people often miss?
Plug the USB cable into the computer, open a text editor, then place a supported Mifare S50 or S70 card on top of the reader — the card number appears automatically; the step often missed is opening the text editor before presenting the card.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
