YINGHUA
YINGHUA 1×2 Toslink Optical Audio Splitter KVM Switch
Splits one Toslink optical audio source to two outputs supporting LPCM 2.0, DTS and Dolby Digital with signal retiming up to 40 m
- TypeHDMI
- Splits one optical source to two amplifiers
- Supports LPCM 2.0, DTS and Dolby-AC3 formats
- Signal retiming keeps audio clear up to 40 m
- Over-voltage protection guards against mismatched adapters
- Ready in minutes with a DC 5 V 500 mA supply
Optical Audio Splitter for Dual Amplifiers
This YINGHUA 1×2 Toslink splitter takes a single SPDIF optical source and routes it to two receiving devices such as amplifiers or soundbars. It supports LPCM 2.0, DTS and Dolby-AC3 formats without degrading the digital signal. The unit requires a DC 5 V 500 mA power supply and installs in minutes.
Suitable for Stereo and Multi-Room Setups
Buyers who need to feed one optical output from a console, DVD player or set-top box into two separate audio zones will find this device fits the task. It does not switch between multiple sources, so users who require input selection should look at a matrix switch instead.
Signal Integrity Over Extended Runs
The splitter retimes the optical signal and works with fibre cable loss below 0.2 dB/m, allowing output distances up to 40 m at a peak wavelength of 650 nm and a maximum baud rate of 16 Mbps. Over-voltage protection guards the circuitry if an incorrect power adapter is connected.
Highlights
- Splits one optical source to two amplifiers
- Supports LPCM 2.0, DTS and Dolby-AC3 formats
- Signal retiming keeps audio clear up to 40 m
- Over-voltage protection guards against mismatched adapters
- Ready in minutes with a DC 5 V 500 mA supply
Specifications
| Type | HDMI |
|---|
Questions about this item
What source device with a Toslink optical output do I need to feed this splitter?
Any device that provides a digital optical SPDIF signal — such as a PS4, DVD player, HDTV, set-top box, VHS or VCR — can serve as the single input source.
Will my existing Toslink cables work with the 650 nm wavelength and 16 Mbps baud rate of this unit?
Yes, standard Toslink cables rated for 650 nm and up to 16 Mbps are compatible; keep each run under 40 m and cable loss below .2 dB/m for reliable operation.
How can I verify the splitter is passing LPCM 2.0, DTS or Dolby Digital correctly after installation?
Check that both connected amplifiers or receivers display the expected audio format and that sound plays without dropouts on each output.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation 4K60 HDMI Dual-Head KVM Switch 4 Port
$774.99
0.0090045BTC
In stock