Yilespq 6 ft 18 AWG 125V 10A Power Extension Cord White
A 6 ft indoor 18 AWG extension cord with polarised NEMA 1-15P to NEMA 1-15R connectors, ETL listed for 125 V 10 A
- FeaturesThis 6ft power extension cord is made by Yilespq and feature
- 6 ft reach places power where you need it
- 18 AWG pure copper conductors deliver reliable current flow
- ETL certified for verified electrical safety
- Polarised NEMA 1-15P to 1-15R connectors prevent mis-insertion
- White PVC jacket resists wear in indoor settings
Indoor power extension for small appliances
This six-foot cord extends a two-prong plug to reach a wall outlet or power strip. It is rated for 125 volts and 10 amps with 18 AWG copper conductors inside a white PVC jacket. The ETL-listed cable carries a NEMA 1-15P polarised male plug and a matching NEMA 1-15R polarised female receptacle. It suits indoor devices such as rice cookers, desktop fans, projectors and water dispensers.
Replaces short factory leads on two-prong devices
The cord adds length when the original cable cannot reach the socket or when bulky adapters block adjacent outlets on a strip. The jump is worthwhile whenever the appliance uses a standard polarised two-prong plug and stays within the 10 amp rating. It does not serve equipment that requires a three-prong grounded connection or draws more current than the 18 AWG conductors can carry.
Limited to polarised two-prong 125 V circuits
The NEMA 1-15P to 1-15R interface only fits polarised two-slot outlets and cannot be used with grounded three-prong plugs. The 18 AWG gauge restricts the cord to a maximum of 10 amps at 125 volts, so it must not be loaded beyond that level. Outdoor use, high-power heating appliances and daisy-chaining multiple extensions are outside the intended scope of this cable.
Highlights
- 6 ft reach places power where you need it
- 18 AWG pure copper conductors deliver reliable current flow
- ETL certified for verified electrical safety
- Polarised NEMA 1-15P to 1-15R connectors prevent mis-insertion
- White PVC jacket resists wear in indoor settings
Specifications
| Brand | Yilespq |
|---|---|
| Features | This 6ft power extension cord is made by Yilespq and features a style with material. It supports a voltage of 125 volts and an input current of 10 amps. The cable is White in color and is UL listed. It comes with a Male-to-Female connector and does not require batteries. |
Questions about this item
Will the 18 AWG cord and NEMA 1-15P plug fit behind my desk without blocking the other outlet?
The 6 ft white cord uses a polarised 2-prong NEMA 1-15P plug and matching 1-15R socket, so its slim profile sits flush against the wall and leaves the adjacent receptacle free.
Which way round do I connect the polarised plug so the lamp gets the correct hot and neutral?
The male plug has one blade wider than the other; insert it so the wide blade matches the wide slot on the wall outlet, then plug your device into the female end — this keeps hot and neutral aligned through the 18 AWG copper conductors.
How often should I check the PVC jacket and ETL-listed 10 A 125 V rating for wear?
Inspect the white PVC jacket every few months for cracks, heat marks or loose blades; if the insulation is damaged or the cord feels warm at 10 A load, replace it to maintain the ETL safety certification.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



