We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved cable with ATX 8-pin male and PCIe 6+2-pin male connectors, 25-inch length

YEZriler 8 Pin PCIe Cable for Corsair PSUs ATX 8 Pin Male to PCIe 6+2 Male Sleeved 25-inch 63cm

SKU CH-V31H-KPF8Q

Connects Corsair ATX 8-pin PSU outputs to graphics cards via a 6+2 PCIe plug using 18 AWG sleeved wire

  • Length20.5 feet
  • Connector DetailMale-to-Male
  • SpecificationsWeight: 61.3 grams; Connector: Male-to-Male
  • Connects Corsair PSU to GPU with ATX 8-pin to PCIe 6+2 adapter
  • 25-inch sleeved cable keeps builds tidy and airflow clear
  • 18 AWG tin-coated copper handles high current safely
  • Slide-off 2-pin section lets one cable fit 6-pin or 8-pin graphics cards
  • Hook-and-loop strip included for secure cable routing

PCIe Cable for Corsair PSUs

This sleeved adapter connects a Corsair power supply ATX 8-pin port to a graphics card PCIe 6+2-pin connector. It is built only for video cards and will not work with motherboard EPS sockets. The 25-inch length suits compact builds.

Thermals and power draw

The cable uses 18AWG tin-coated copper conductors rated for typical GPU currents. Passive wiring adds no fan noise and generates negligible heat under normal loads. A hook-and-loop strip is included for tidy routing inside the case.

Connector compatibility

The ATX 8-pin male end plugs into listed Corsair RM, RMX, HX, AX, SF, TX, CX and CS series units among others. The PCIe 6+2-pin male end fits 6-pin or 8-pin graphics cards from ASUS, ASRock, Gigabyte, Radeon and similar brands. It does not work with the AX1200 model.

Highlights

  • Connects Corsair PSU to GPU with ATX 8-pin to PCIe 6+2 adapter
  • 25-inch sleeved cable keeps builds tidy and airflow clear
  • 18 AWG tin-coated copper handles high current safely
  • Slide-off 2-pin section lets one cable fit 6-pin or 8-pin graphics cards
  • Hook-and-loop strip included for secure cable routing

Specifications

BrandYEZriler
Length20.5 feet
Connector DetailMale-to-Male
SpecificationsWeight: 61.3 grams; Connector: Male-to-Male

Questions about this item

How do I install the ATX 8-pin male end into my Corsair RM PSU and avoid the common mistake?

Plug the ATX 8-pin male connector only into the PSU side; the PCIe 6+2 male end goes to the graphics card. The two 8-pin ends are not interchangeable, so do not reverse them.

What upkeep will this 18AWG sleeved cable need over time?

No scheduled maintenance is required. Inspect the 63 cm length and connectors for dust or damage during routine PC cleaning; replace the cable if the sleeving frays or pins loosen.

What limit appears first when the GPU draws sustained power through this 18AWG wire?

The 18 AWG gauge sets the current-carrying limit; under continuous heavy load the wire will hit its thermal ceiling before the connectors do.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.