We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black braided cables with 4-pin female and 8-pin male connectors

YEZriler 4 Pin to 8 Pin CPU Power Adapter Cord 2-Pack 13-inch 18AWG 200W Braided

SKU CH-1EGH-HG6Y4

Converts a PSU 4-pin CPU connector to an 8-pin (4+4) motherboard socket using 18AWG braided cable rated for 200W

  • ColorBlack
  • Length< 1"
  • Terminal GenderMale to Female
  • Specifications12 volts, 13, inches, Male-to-Female
  • ShieldingBraided
  • ConstructionBraided
  • Extends CPU power reach with 13-inch length
  • 18AWG wire delivers up to 200W safely
  • Braided sleeving protects cables inside the case
  • 4-pin female to 8-pin (4+4) male adapter fits standard ATX
  • Two adapters and a hook-loop strip included

Two-pack adapter for ATX 4-pin PSUs

This pair of braided cables converts a power supply's ATX 4-pin male output into an 8-pin (4+4) male connector for the motherboard CPU socket. Each cord measures 13 inches (34 cm) and uses 18 AWG tin-coated copper wire. The set includes a hook-and-loop strip for cable management.

Rated 200 W at 12 V

The adapter supports a maximum continuous draw of 200 watts on the 12-volt rail. It is designed only for power supplies that already provide a CPU 4-pin male port; it does not create additional power phases or convert voltage levels.

Not for graphics-card power

Using this cable to feed a GPU will damage the graphics card because the pinout and current capacity are specific to CPU sockets. Builders needing PCIe power must use the correct cables supplied with their power supply.

Highlights

  • Extends CPU power reach with 13-inch length
  • 18AWG wire delivers up to 200W safely
  • Braided sleeving protects cables inside the case
  • 4-pin female to 8-pin (4+4) male adapter fits standard ATX
  • Two adapters and a hook-loop strip included

Specifications

BrandYEZriler
ColorBlack
Length< 1"
Terminal GenderMale to Female
Specifications12 volts, 13, inches, Male-to-Female
ShieldingBraided
ConstructionBraided
FeaturesMale-to-Female, 12 volts, 13 inches
Disclaimerfalse

Questions about this item

What does the 200 W rating mean once the adapter is installed?

The 200 W rating is the maximum continuous power the 18 AWG conductors can carry safely from a 4-pin PSU output to an 8-pin motherboard CPU socket.

Which ATX standard does the 4-pin to 8-pin (4+4) interface follow, and what does it cap in practice?

It follows the ATX 12 V 4-pin and 8-pin (4+4) pinouts, capping delivery at the 200 W limit of the 18 AWG wires and the source 4-pin connector.

What clearance and mounting features does the 13-inch braided cable need to fit?

The 13-inch (34 cm) length with braided sleeving and an included hook-and-loop strip requires enough space behind the motherboard tray to route without sharp bends.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.