Yescom USA, Inc.
Yescom USA, Inc. Garage Floor Mat Roll Diamond PVC 3mm 19.5x6.5 Ft
A 3 mm thick PVC floor mat with a diamond tread pattern provides anti-slip traction and water resistance across a 19.5 by 6.5 ft area
- FeaturesDown Lighting
- Height7.090
- Width7.490
- Diamond tread pattern improves traction on garage floors
- PVC construction resists wear from vehicle traffic
- Roll cuts easily with a knife for custom fit
- Sweep or vacuum surface for quick maintenance
- Water-resistant barrier protects sub-floor from spills
Garage Floor Mat Roll Diamond PVC 3mm
This PVC floor mat roll measures 19.5 feet by 6.5 feet and features a diamond tread pattern for improved traction. The anti-slip surface suits garages, workshops, gyms and other areas where slip resistance is needed. It protects concrete or wood sub-floors from deterioration and hides existing cracks.
Capacity and Headroom 234 by 78 Inches
The roll covers 234 inches by 78 inches and withstands vehicle-grade loads from trailers, trucks or SUVs without deforming. It also serves as a water containment mat during winter to guard against salt damage. The material resists wear from long-term standing but is not designed for extreme chemical exposure or industrial machinery traffic.
Easy Cut Install Clean Water Resistant
The mat can be trimmed with a sharp knife or scissors to fit custom dimensions and installs by simply rolling it out. Maintenance requires only a vacuum, broom or dry mop to remove dust and debris without dismantling. Its water-resistant surface prevents dirty water penetration, making stains easy to wipe away.
Highlights
- Diamond tread pattern improves traction on garage floors
- PVC construction resists wear from vehicle traffic
- Roll cuts easily with a knife for custom fit
- Sweep or vacuum surface for quick maintenance
- Water-resistant barrier protects sub-floor from spills
Specifications
| Brand | Yescom |
|---|---|
| Features | Down Lighting |
| Height | 7.090 |
| Width | 7.490 |
Questions about this item
Will the 234-inch roll lie flat over my existing epoxy coating without curling at the edges?
The PVC mat unrolls directly onto the floor and stays in place through its own weight and the diamond tread grip; no adhesive is required.
How can I verify the 3 mm thickness is uniform after I cut the 78-inch width to fit my workbench area?
Measure the cut edge with a caliper or ruler at several points; the material should read 3 mm throughout because it is extruded as a single solid layer.
Does the roll include double-sided tape or seam strips for joining a second 19.5-foot length?
The package contains only the PVC floor mat roll itself; joining strips or tape are not included.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



