We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five clear PVC U-channels, 39 inch long, rectangular profile

Yescom USA, Inc.

Yescom USA, Inc. 39" Clear PVC U-Channel 5-Pack Flush Mount

SKU CH-JEY5-XW9A3

Set of five 39-inch clear PVC channels hold 9/16-inch LED strip lights for straight, protected runs on walls, ceilings or cabinets

  • finishClear
  • styleModern
  • materialAcrylic
  • featuresDown Lighting
  • typeLamp Sets
  • height2.000
  • Holds strips 1/2" to 9/16" wide for a straight, clean line
  • Corrosion-resistant PVC withstands wear in cabinets, ceilings or storefronts
  • Screw-mount channels can be cut or joined to any custom length
  • Five 39 3/8" tracks cover up to 100 cm of linear lighting
  • Clear acrylic finish keeps the modern look unobtrusive on any surface

39-Inch Clear PVC U-Channel Mounting System

This set of five transparent channels secures LED flexible strip lights with flat bases measuring 1/2 to 9/16 inch wide and 9/16 inch high. Each channel spans 39 3/8 inches, providing a straight mounting surface for clean, professional lighting lines. The modern clear finish blends discreetly into ceilings, walls, or cabinetry.

Compatibility Limits for 9/16-Inch Strip Lights

Channels accept only flat-based strips within the specified width and height range; wider, taller, or rounded profiles will not seat properly. The rigid PVC construction prevents bending around tight curves, so layouts must follow straight runs or wide-radius turns. Maximum continuous length per piece is fixed at the supplied dimension.

Screw-Mount Installation With On-Site Cutting

Installers drill pilot holes through the channel flange and fasten with screws onto any flat surface. Channels can be sawn to shorter lengths or butted end-to-end for custom runs, but cutting produces plastic debris that must be cleared before inserting strips. Misaligned screw holes or uneven mounting surfaces cause visible gaps or strip misalignment.

Highlights

  • Holds strips 1/2" to 9/16" wide for a straight, clean line
  • Corrosion-resistant PVC withstands wear in cabinets, ceilings or storefronts
  • Screw-mount channels can be cut or joined to any custom length
  • Five 39 3/8" tracks cover up to 100 cm of linear lighting
  • Clear acrylic finish keeps the modern look unobtrusive on any surface

Specifications

BrandDELight
Part Number11DEL002-NMNT-1M
finishClear
styleModern
materialAcrylic
featuresDown Lighting
typeLamp Sets
height2.000

Questions about this item

Should I buy the 5-pack or look for single channels?

The 5-pack supplies five 39 3/8-inch channels; you can cut or join them to fit the exact run you need.

What does the 9/16-inch dimension mean once the strip is installed?

The channel accepts strip lights with a flat base up to 9/16 inch wide and 9/16 inch high, so the strip sits flush inside the PVC.

How does the screw-mount design limit where I can install it?

You drill holes in the mounting surface and fasten the channel with screws, so any flat wall, ceiling or cabinet that can take a screw will work.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.