We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square metal flagpole base with integrated down lighting, baked varnish finish, four mounting holes, rubber seal and tightening knob

Yescom USA, Inc.

Yescom USA, Inc. 22FPS002-FPB-06 Flagpole Base Square Down Lighting

SKU CH-GCEZ-GBA7R

A square flagpole base with integrated down lighting, mounting on decks or concrete to hold poles from 1 5/16" to 2 3/8" using included sleeves

  • TypeFlag Poles & Parts
  • Size/DimensionsSquare
  • FeaturesDown Lighting
  • Stable hold for 6 cm poles with included sleeves for thinner diameters
  • Four predrilled holes and anchor bolts enable secure concrete mounting
  • Heavy-duty metal with rust-resistant baking varnish withstands outdoor exposure
  • Rubber ring seals the joint against water ingress for lasting performance
  • Wobble-free tightening knob ensures steady flag display in wind

Universal deck-mount flagpole base

This square base fits poles of 2 3/8" diameter and includes plastic sleeves for thinner poles down to 1 5/16". It suits residential decks, patios or institutional grounds where a flag or parasol needs a fixed mounting point on concrete. Builders who need a base for poles larger than 2 3/8" or a portable weighted stand should look elsewhere. The integrated down-lighting adds illumination without separate fixtures.

Simple bolt-down installation

Four predrilled holes accept anchor bolts for a secure concrete fix. A rubber ring at the joint seals out water and a tightening screw knob removes wobble during adjustment. Installers must supply their own concrete anchors and ensure the substrate is sound; no hardware is included for wood or composite decking. Misaligned holes or soft concrete are the usual causes of instability.

All-weather durability under load

Heavy-duty metal with a baked varnish finish resists rust through seasonal exposure. The rubber seal protects the threaded joint from moisture ingress during prolonged rain or snow. The structure holds a fully extended flag or loaded parasol in sustained wind without loosening. Buyers in coastal or high-corrosion environments should verify material suitability for their conditions.

Highlights

  • Stable hold for 6 cm poles with included sleeves for thinner diameters
  • Four predrilled holes and anchor bolts enable secure concrete mounting
  • Heavy-duty metal with rust-resistant baking varnish withstands outdoor exposure
  • Rubber ring seals the joint against water ingress for lasting performance
  • Wobble-free tightening knob ensures steady flag display in wind

Specifications

BrandYescom
Part Number22FPS002-FPB-06
TypeFlag Poles & Parts
Size/DimensionsSquare
FeaturesDown Lighting

Questions about this item

How can I confirm the base is stable after mounting it on concrete?

Tighten the screw knob until the pole has no wobble and check that the rubber ring sits flush against the joint.

What comes in the box and what must I supply myself?

The base, a set of plastic sleeves for thinner poles and anchor bolts are included; you must provide the flagpole or umbrella pole.

Which pole diameters does the 2 3/8" base with sleeves accommodate?

It fits 2 3/8" poles directly and, with the included sleeves, poles from 1 5/16" to 1 15/16".

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.