We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black flat PCIe power cable with dual 6+2-pin connectors and pigtail, 60+20 cm

YEPLOOK

YEPLOOK PCIe Dual 8Pin 6+2Pin Pigtail GPU Cable Corsair AX760i AX860i AX1200i AX1500i Type 3 60+20cm 18AWG

SKU CH-M73W-23RDQ

Supplies dual 6+2-pin PCIe power from Corsair AX-i Type 3 PSUs using 18AWG wire at 60+20 cm length

  • ColorBlack
  • Cable Length1.96 ft. (0.60m)
  • UL1007 18AWG wire resists heat up to 80°C for reliable GPU power
  • Flat cable design bends easily to simplify routing inside the case
  • 6+2 pin connector slides to fit 6-pin or 8-pin graphics cards
  • 60 cm main run plus 20 cm pigtail suits Corsair AX-i Type 3 PSUs
  • 34 tin-plated copper strands deliver stable 300V current to high-end GPUs

Compatible Corsair AX-i Type 3 PSUs

This internal power cable is built for Corsair AX760i, AX860i, AX1200i and AX1500i modular power supplies using the Type 3 pinout. It is not compatible with Corsair Type 1, Type 2 or Type 5 units, nor with modular PSUs from other brands. Builders using those platforms must select a different cable.

Dual 6+2-pin PCIe connectors with pigtail

The cable splits into two 6+2-pin PCIe ends from a single PSU 8-pin port, with the second connector on a 20 cm pigtail. Total length is 60 cm to the first connector plus 20 cm to the second. This layout comfortably powers one graphics card needing two 8-pin sockets or two cards each needing a single 6-pin or 8-pin socket. It cannot supply three or more PCIe connectors.

18AWG UL1007 wire rated to 300 V and 80 °C

The cable uses 34 strands of tin-plated copper wire built to the UL1007 18AWG standard. It is rated for 300 V nominal voltage and an operating range of -30 °C to 80 °C. The flat, flexible construction eases routing in tight cases, but the fixed 60+20 cm length may not reach distant GPU sockets in large chassis.

Highlights

  • UL1007 18AWG wire resists heat up to 80°C for reliable GPU power
  • Flat cable design bends easily to simplify routing inside the case
  • 6+2 pin connector slides to fit 6-pin or 8-pin graphics cards
  • 60 cm main run plus 20 cm pigtail suits Corsair AX-i Type 3 PSUs
  • 34 tin-plated copper strands deliver stable 300V current to high-end GPUs

Specifications

BrandYEPLOOK
ColorBlack
Cable Length1.96 ft. (0.60m)

Questions about this item

Will the 60+20 cm dual 8-pin cable reach my GPU if I keep the Corsair AX860i mounted at the bottom of a mid-tower case?

The total length is 60 cm to the first connector plus 20 cm to the second, giving 80 cm end-to-end for typical bottom-mounted PSU routing.

How can I verify the 18AWG cable is delivering stable power to my graphics card after installation?

Check that both 6+2 pin connectors seat firmly, then monitor GPU core voltage and 12 V rail readings in HWInfo or GPU-Z under load for steady values.

Does the package include any extra pins or adapters for the empty PSU-side pin, or must I buy them separately?

The empty pin on the PSU 8-pin is the normal Type 3 layout; the box contains only the single dual 6+2 pin pigtail cable with no extra adapters.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.