We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved PCIe power cable with dual 6+2 pin connectors and single PSU 8 pin end

YEPLOOK

YEPLOOK PCIe 6+2 Dual 8Pin Sleeved Cable for Corsair SF450 SF600 SF750 Type 4 60+20CM 18AWG

SKU CH-BEDY-8FFTP

A modular PSU-to-GPU cable with dual 6+2-pin PCIe connectors, 18 AWG tinned copper, nylon sleeving and 60-plus-20 cm length for Corsair SF Type 4 units

  • Typemodular power cable
  • ColorBlack
  • Connector A2x PCIe 6+2pin male
  • Connector BPSU 8Pin
  • Connector Number3
  • Connector DetailPCIe 8pin
  • Tinned copper wire resists corrosion and extends cable life
  • Flat braided nylon sleeve allows tight folds and neat routing
  • Dual PCIe 6+2 connectors power 6-pin, 8-pin or 6+8-pin GPUs
  • 60 cm plus 20 cm length suits compact Corsair SF builds
  • 18 AWG UL1007 rated for 300 V and -30 °C to 80 °C

Corsair SF-Series Type 4 GPU Cable

This YEPLOOK cable connects Corsair SF450, SF600 and SF750 Type 4 modular power supplies to graphics cards that require one or two PCIe 6+2 pin connectors. The single PSU-side 8-pin plug splits into two GPU-side 8-pin connectors with removable 2-pin sections so each can serve a 6-pin or 8-pin socket.

Not for Type 5 or other-brand PSUs

Builders using a Corsair SF850, SF1000 or any Type 1, Type 2 or Type 5 unit must choose a different cable because the pin layout is incompatible and mixing cables may cause damage. The same restriction applies to modular power supplies from other manufacturers.

PSU 8-pin to dual PCIe 6+2 pin split

The decisive specification is the connector arrangement: one 8-pin male plug that fits the Type 4 PSU socket and two 6+2 pin male plugs that reach the graphics card. If your power supply uses the Corsair Type 4 pin-out and your GPU needs two 8-pin or 6-pin connectors, this cable matches the requirement.

Highlights

  • Tinned copper wire resists corrosion and extends cable life
  • Flat braided nylon sleeve allows tight folds and neat routing
  • Dual PCIe 6+2 connectors power 6-pin, 8-pin or 6+8-pin GPUs
  • 60 cm plus 20 cm length suits compact Corsair SF builds
  • 18 AWG UL1007 rated for 300 V and -30 °C to 80 °C

Specifications

BrandYEPLOOK
Typemodular power cable
ColorBlack
Connector A2x PCIe 6+2pin male
Connector BPSU 8Pin
Connector Number3
Connector DetailPCIe 8pin
Terminal GenderMale to Male

Questions about this item

What PSU connector does this cable plug into on a Corsair SF600 Type 4 unit?

It connects to an 8-pin modular port on the PSU side; one pin position is intentionally empty as part of the standard Type 4 pin-out.

How do I attach the 6+2-pin ends to a graphics card that needs both an 8-pin and a 6-pin socket?

Slide the detachable 2-pin section onto the 6-pin base to form an 8-pin plug for one socket, and use the remaining 6-pin base directly in the 6-pin socket.

When should I consider replacing this cable if I run a GPU drawing near the 800 W rating?

Inspect the tin-plated copper conductors and nylon sleeving periodically; replace the cable if you see discoloration, melted insulation or cracked braid from sustained high-current heat.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.