We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved PCIe power cable with dual 6+2 pin GPU connectors and single PSU 8 pin end

YEPLOOK

YEPLOOK PCIe 6+2 dual 8-pin cable for Corsair AX1600i AX1000 AX850 Titanium 18AWG

SKU CH-4F78-ZV3SW

PCIe dual 6+2 pin cable connects Corsair AX-series PSUs to graphics cards using tinned copper wire and nylon sleeving

  • Typemodular power cable
  • ColorBlack
  • Connector A2x PCIe 6+2pin male
  • Connector BPSU 8Pin
  • Connector Number3
  • Connector DetailPCIe 8pin
  • Tinned copper wiring resists corrosion for longer cable life
  • Flat braided nylon sleeve allows tight folds and neat routing
  • Dual 6+2 pin PCIe connectors fit 6-pin, 8-pin or 6+8-pin GPU sockets
  • Designed for Corsair AX1600i, AX1000 and AX850 Titanium Type 4 modular PSUs
  • 18 AWG tinned copper rated 300 V from -30 °C to 80 °C

Compatible GPU power cable

This YEPLOOK PCIe cable connects Corsair AX1600i, AX1000 and AX850 Titanium modular power supplies to graphics cards. It carries a PSU-side 8-pin connector that splits into two 6+2-pin PCIe plugs, supporting cards with 6-pin, 8-pin or combined 6+8-pin sockets. The cable is rated for up to 800 W delivery.

Thermals and electrical safety

Tinned copper conductors resist corrosion and maintain conductivity across a -30 °C to 80 °C operating range. The 18 AWG wires meet the AWM UL1007 300 V specification with 34 individual strands inside a nylon-braided sleeve. Flat construction improves airflow and reduces heat build-up during sustained loads.

Build integration

Total length measures approximately 60 cm plus a 20 cm split, giving enough reach for most full-tower layouts while the flexible braid allows tight routing behind motherboard trays. The empty pin on the PSU connector is a standard design feature, not a defect. This cable is not compatible with modular power supplies from other brands or unlisted Corsair models.

Highlights

  • Tinned copper wiring resists corrosion for longer cable life
  • Flat braided nylon sleeve allows tight folds and neat routing
  • Dual 6+2 pin PCIe connectors fit 6-pin, 8-pin or 6+8-pin GPU sockets
  • Designed for Corsair AX1600i, AX1000 and AX850 Titanium Type 4 modular PSUs
  • 18 AWG tinned copper rated 300 V from -30 °C to 80 °C

Specifications

BrandYEPLOOK
Typemodular power cable
ColorBlack
Connector A2x PCIe 6+2pin male
Connector BPSU 8Pin
Connector Number3
Connector DetailPCIe 8pin
Terminal GenderMale to Male

Questions about this item

How do I install this PCIe 6+2 dual 8-pin cable and which step do people often get wrong?

Match the PSU 8-pin connector to the Corsair Type 4 port exactly; the empty pin is normal. Then slide each 2-pin section onto the 6-pin base to form the 8-pin GPU plugs your card needs.

What maintenance or replacement will this cable need later?

The tinned copper wires resist corrosion, so no routine maintenance is required. Replace only if the nylon braid frays or a connector becomes loose after repeated reseating.

What limit appears first under sustained load with this 18AWG cable?

The 18AWG conductors are rated for 300 V and an 80 °C maximum operating temperature; sustained currents near the 800 W supported level will hit the thermal limit before the voltage rating.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.