YEPLOOK
YEPLOOK PCIe 2x 8Pin 6+2Pin Sleeved 60+20CM 18AWG Corsair HX Type 4 GPU Power Cable
Sleeved 18AWG tinned-copper cable connects a Corsair HX Type 4 PSU to two GPU 6+2-pin sockets over 60 cm plus a 20 cm branch
- Typemodular power cable
- ColorBlack
- Connector A2x PCIe 6+2pin male
- Connector BPSU 8Pin
- Connector Number3
- Connector DetailPCIe 8pin
- Tinned copper resists corrosion for longer cable life
- Nylon-braided flat design allows tight folds and tidy routing
- Dual 6+2-pin PCIe connectors fit 6-pin, 8-pin or 6+8-pin GPU sockets
- 18 AWG UL1007 wire rated for 300 V and -30 °C to 80 °C
- 60 cm plus 20 cm length suits Corsair HX Type 4 modular PSUs
Corsair HX Type 4 GPU Power Cable
This YEPLOOK modular cable connects Corsair HX750, HX850, HX1000 and HX1200 Type 4 power supplies to graphics cards. It carries a PSU-side 8-pin plug that splits into two PCIe 6+2-pin connectors, each sliding to fit 6-pin or 8-pin sockets. The 18AWG tinned copper conductors are wrapped in a black nylon braided net for flexibility and corrosion resistance.
Builders Using Corsair HX Type 4 Units
The cable is made for owners of the listed Corsair HX Platinum models who need a replacement or spare GPU power lead. It will not work with other Corsair series, other brands or non-modular units, and mixing it with unrelated modular cables can cause damage. Buyers without a compatible HX Type 4 PSU should look elsewhere.
60 cm + 20 cm Daisy-Chain Length
The total run measures approximately 60 cm from the PSU to the first connector plus 20 cm to the second, giving enough reach for most dual-connector cards while keeping slack manageable. The pin layout includes an empty position on the PSU 8-pin plug, which is a normal design feature and not a defect.
Highlights
- Tinned copper resists corrosion for longer cable life
- Nylon-braided flat design allows tight folds and tidy routing
- Dual 6+2-pin PCIe connectors fit 6-pin, 8-pin or 6+8-pin GPU sockets
- 18 AWG UL1007 wire rated for 300 V and -30 °C to 80 °C
- 60 cm plus 20 cm length suits Corsair HX Type 4 modular PSUs
Specifications
| Brand | YEPLOOK |
|---|---|
| Type | modular power cable |
| Color | Black |
| Connector A | 2x PCIe 6+2pin male |
| Connector B | PSU 8Pin |
| Connector Number | 3 |
| Connector Detail | PCIe 8pin |
| Terminal Gender | Male to Male |
Questions about this item
How do I install this cable into a Corsair HX Type 4 PSU and the step people get wrong?
Plug the single PSU 8Pin end into the Type 4 modular port matching its pin layout; the empty pin is normal. Then connect each 6+2Pin to the GPU, sliding the 2Pin section on for 8Pin or off for 6Pin.
What maintenance or replacement will this cable need later?
The tinned copper conductors resist corrosion, so no periodic maintenance is required. Replace only if the nylon braid frays, connectors loosen, or you move to a non-Type 4 PSU where the pinout differs.
What limit shows up first under sustained heavy GPU load?
The 18AWG wires are rated for 300V and 800W maximum GPU draw; sustained loads above 800W will hit the cable's power limit before the 80°C temperature rating becomes a factor.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



