YEPLOOK
YEPLOOK 6Pin to 3 SATA Right Angled Power Cable 50+15+15CM 18AWG
Right-angled 6-pin to triple SATA power cable, 50+15+15 cm 18AWG, for compatible Corsair modular PSUs
- ColorBlack
- Connect three SATA drives from one 6-pin PSU connector
- Right-angled plugs simplify routing in tight cases
- 18 AWG UL1007 wire handles sustained loads
- 50 cm lead plus two 15 cm branches aid cable management
- Compatible with Corsair CX-F, RM, RMx and RMi white series PSUs
Compatible Power Cable for Corsair PSUs
This cable connects a six-pin modular output on select Corsair CX-F, RM, RMx and RMi white series units to three SATA devices. It suits builders adding multiple drives or riser cards to a compatible power supply without using the stock cables.
Cable Construction and Heat Resistance
The assembly uses UL1007 rated 18AWG conductors that resist heat and ageing. A right-angled six-pin plug eases routing in tight spaces, while the 50 cm lead and two 15 cm branches keep the layout tidy. An unused pin on the six-pin connector is normal for this pinout.
Build Integration and Limitations
The cable frees up drive bays by powering three SATA drives from a single modular port. It only works with the listed Corsair Type 3 and Type 4 units; other brands or series use different pinouts and may be damaged if connected. Buyers needing Molex or PCIe connectors will require a different cable.
Highlights
- Connect three SATA drives from one 6-pin PSU connector
- Right-angled plugs simplify routing in tight cases
- 18 AWG UL1007 wire handles sustained loads
- 50 cm lead plus two 15 cm branches aid cable management
- Compatible with Corsair CX-F, RM, RMx and RMi white series PSUs
Specifications
| Color | Black |
|---|
Questions about this item
How do I install the 6-pin to 3 SATA cable and which orientation mistake should I avoid?
Plug the 6-pin end into the modular port on a compatible Corsair PSU and connect each right-angled SATA plug to your drives; the empty NC hole in the 6-pin connector is normal and not a defect.
What maintenance or replacement will the 18AWG UL1007 cable need over time?
The 18AWG UL1007 wire is heat resistant and not prone to aging, so no routine maintenance is required; replace only if the insulation is cut or a connector pin is bent.
What is the first limit that appears when the cable runs three drives continuously?
The 18AWG conductors set the current limit; sustained heavy loads on all three SATA devices will hit the wire gauge capacity before the connectors or PSU port become a bottleneck.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



