YEPLOOK
YEPLOOK 6Pin to 3 SATA Power Cable Corsair CX 430M 500M 600M 750M 850M 18AWG
Connects Corsair semi-modular PSUs to three SATA drives using 18AWG cable with 50 cm lead and 15 cm branches
- ColorBlack
- Connect up to three SATA drives from one 6-pin modular port
- 50 cm lead plus two 15 cm branches gives flexible routing
- 18 AWG UL1007 wire resists heat and aging for lasting reliability
- Designed for Corsair Type 4 semi-modular PSUs including CX430M CX500M CX600M CX750M CX850M
- Empty NC pin on the 6-pin connector is standard pinout, not a defect
YEPLOOK 6Pin to 3 SATA Cable
This YEPLOOK cable connects a Corsair Type 4 or Type 3 modular PSU to three SATA devices. It suits builders adding multiple SSDs, hard drives or riser cards using a single 6-pin peripheral port on compatible Corsair CX-M, RM, HX, HXi or AXi units.
50+15+15 cm length with 18AWG wire
The lead provides 50 cm to the first connector then 15 cm gaps to the second and third, giving enough reach for typical drive cages. UL1007 18AWG conductors handle standard SATA power loads; the empty NC pin on the 6-pin plug is normal and does not affect operation.
Pre-wired straight SATA connectors
Each SATA head is fixed in a straight orientation, removing the need for separate adapters and simplifying cable routing. The black sheath keeps the loom tidy inside the case while the pinout matches Corsair Type 4 and Type 3 modular sockets exactly.
Highlights
- Connect up to three SATA drives from one 6-pin modular port
- 50 cm lead plus two 15 cm branches gives flexible routing
- 18 AWG UL1007 wire resists heat and aging for lasting reliability
- Designed for Corsair Type 4 semi-modular PSUs including CX430M CX500M CX600M CX750M CX850M
- Empty NC pin on the 6-pin connector is standard pinout, not a defect
Specifications
| Color | Black |
|---|
Questions about this item
Will this 6-pin to 3 SATA cable work with the modular ports on my Corsair CX600M power supply?
Yes, the cable is designed for Corsair Type 3 and Type 4 semi-modular PSUs including the CX430M, CX500M, CX600M, CX750M and CX850M models.
How can I confirm the cable is delivering power correctly to my SSDs after connecting it?
Each SATA connector supplies standard power; the drives should spin up and appear in BIOS or the operating system once the 6-pin end is seated in the PSU.
Does the package include the 50 cm lead with three SATA plugs spaced 15 cm apart, and do I need any extra adapters?
The cable is a single 18 AWG assembly measuring 50 cm to the first connector then 15 cm between each of the three SATA plugs; no additional adapters are required.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



