We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 6-pin male to three Molex 4-pin female angled cable, 50+15+15cm 18AWG

YEPLOOK

YEPLOOK 6-Pin to 3× Molex Angled Cable for Corsair SF450 SF600 SF700 Type 4 PSU

SKU CH-Q4QX-6XED7

Angled 6-pin to triple Molex cable powers legacy drives and fans from Corsair Type 4 SFX PSUs

  • ColorBlack
  • Connects three Molex devices from one Corsair Type 4 PSU port
  • 50 cm main lead with two 15 cm branches for tidy routing
  • 18 AWG UL1007 tinned copper handles peripheral power reliably
  • Angled 6-pin plug eases installation in compact SFX builds
  • Compatible with Corsair SF450, SF600, SF700 and Type 3/4 modular PSUs

Cable for Corsair Type 3 and 4 PSUs

This angled adapter connects a single 6-pin modular port on compatible Corsair SF450, SF600 and SF700 units to three Molex 4-pin peripherals. It targets builders who need legacy power for fans, optical drives or older accessories in compact systems. The cable is new and built specifically for the listed Type 3 and Type 4 power supplies.

18 AWG tinned copper with angled 6-pin plug

UL1007 18AWG tinned copper conductors resist heat and ageing while staying flexible for tight routing. The angled 6-pin male connector eases insertion in cramped SFX cavities and the 50 cm lead with two 15 cm branches reaches multiple devices without strain. Two unused pins on the 6-pin side are normal and not a defect.

Replaces Molex daisy chains

The assembly upgrades setups that lack enough Molex headers or rely on bulky splitters, consolidating three connections into one modular port. The jump is worth it when a Corsair Type 3 or Type 4 PSU is already installed and additional Molex devices must be powered cleanly. It does not suit Type 1, Type 2 or non-Corsair units.

Highlights

  • Connects three Molex devices from one Corsair Type 4 PSU port
  • 50 cm main lead with two 15 cm branches for tidy routing
  • 18 AWG UL1007 tinned copper handles peripheral power reliably
  • Angled 6-pin plug eases installation in compact SFX builds
  • Compatible with Corsair SF450, SF600, SF700 and Type 3/4 modular PSUs

Specifications

ColorBlack

Questions about this item

How does the 6-pin Type 4 connector limit what the cable can power?

The 6-pin male end plugs only into Corsair Type 3 and Type 4 modular PSUs such as the SF450, SF600 and SF700; it is not compatible with Type 1 or Type 2 units or other brands.

What clearance does the angled Molex end need inside the case?

Each of the three Molex 4-pin female connectors sits on a 15 cm tail after the first 50 cm run, so allow roughly 20 cm from the PSU port to the first device and 6 cm between devices.

Which way round do the two empty pin positions on the 6-pin plug go?

The two missing pins are deliberate blanks in the Corsair Type 4 pinout; insert the 6-pin male connector with the keyed notch aligned to the PSU socket — forcing it the other way will not seat correctly.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.