YEPLOOK 4 Port SATA RAID Controller
This YEPLOOK card adds four SATA ports to a desktop computer through a standard PCI slot. It functions as a RAID controller for connecting multiple hard drives or solid-state drives. The adapter suits users upgrading older systems that lack native SATA headers on the motherboard. It provides a direct interface for storage expansion without requiring a newer platform.
Passive cooling runs silently without a fan
The controller operates using passive cooling, producing no audible noise during normal use. Power draw is low, sourced entirely from the PCI bus without external connectors. Thermals remain manageable inside typical desktop chassis airflow. The card is not for builders needing hot-plug support or hardware RAID levels beyond basic striping and mirroring.
Highlights
- Adds four SATA ports via PCI slot
- Hardware RAID support protects data
- Works in standard desktop computers
- New condition, ready to install
Specifications
| Type | IDE |
|---|
Questions about this item
How do I install the YEPLOOK 4 Port SATA RAID Controller PCI and which step is often missed?
Power off the system, insert the card into an available PCI slot, secure the bracket screw, connect SATA data cables to the four ports, then attach power cables to each drive.
What maintenance or replacement will the YEPLOOK 4 Port SATA RAID Controller PCI need later?
No scheduled maintenance is required; if a port fails or the card stops being detected, replace the controller card itself.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
VERBATIM 94839 DataLifePlus 4.7GB 4X DVD+RW 10 Packs dvd media
- DVD+RW
- 4.7GB
Verbatim 97334 50GB 6X BD-R DL Inkjet Printable 25 Packs blu-ray media
- BD-R DL
- 50GB



