We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
56 inch amber and white LED emergency light bar with 104 LEDs and adjustable no-drill roof mount brackets

YanTech

YanTech 56" 104 LED Emergency Beacon Light Bar Amber/White

SKU CH-FA0T-E1E2P

A 56-inch amber and white LED light bar with 104 super-bright LEDs, 39 front flash patterns, three rear traffic-director patterns, red brake and turn signals, white takedown and alley lights.

  • TypeCorner, Bumper, Side & Parking Lights
  • Lens ColorAmber
  • QualityAftermarket OEM
  • 56-inch bar with 104 super-bright LEDs for maximum visibility
  • 39 front flash patterns plus 3 rear traffic-director patterns for flexible warning
  • Red brake, tail and turn-signal lights add safety functions
  • White take-down and alley lights with three operating modes
  • IP67-rated dust and water resistance with 10 G shock tolerance

Product Purpose & Target User

The YanTech 56-inch light bar combines 104 LEDs with amber and white output for emergency and utility vehicles. It delivers 39 front flash patterns plus three rear traffic-director patterns. Integrated red brake, tail and turn-signal lights add DOT-required signalling. A mini control box manages all functions from inside the cab.

Who Should Consider Alternatives

Buyers needing a shorter bar for compact roof space should look elsewhere. Vehicles requiring blue or green warning colours will not be served by the fixed amber and white LEDs. Installers who must avoid any roof drilling will find the adjustable no-drill brackets suitable, but permanent-mount purists may prefer a different mounting style.

Deciding Specification

The unit draws a maximum of 18 amps at 12 V DC with a typical range of 1 to 6 amps. Verify that the vehicle electrical system and wiring can sustain this load before purchase.

Highlights

  • 56-inch bar with 104 super-bright LEDs for maximum visibility
  • 39 front flash patterns plus 3 rear traffic-director patterns for flexible warning
  • Red brake, tail and turn-signal lights add safety functions
  • White take-down and alley lights with three operating modes
  • IP67-rated dust and water resistance with 10 G shock tolerance

Specifications

TypeCorner, Bumper, Side & Parking Lights
Lens ColorAmber
QualityAftermarket OEM

Questions about this item

What voltage supply does the 56" light bar require to operate?

It runs on DC 12 V with an input range of 10.8 V to 13.8 V, drawing up to 18 A peak and typically 1–6 A.

Will the 12 ft control cable reach the cab of my older truck without modification?

The included cable is 12 ft long; you can extend it with your own wire if the factory length falls short.

How can I verify the amber LEDs are performing at the rated output after installation?

The maximum illuminated boundary exceeds 800 LX, so a lux meter aimed at the bar should read above that figure when the front patterns are active.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.