Yale
Yale Accentra AU5305LN 626 Storeroom Lever Lockset
A heavy-duty commercial lever lockset with Augusta style and satin chrome finish, designed for storeroom function and fire-rated for three hours
- TypeDoor Hardware & Components
- Style5300LN Augusta
- Commercial-grade security backed by ANSI Grade 2 certification
- Storeroom function keeps exterior locked while allowing free egress
- Heavy-gauge steel construction resists wear in high-traffic areas
- Satin chrome 626 finish suits modern and traditional door styles
- Three-hour UL fire rating meets life-safety requirements
Yale Accentra Storeroom Lever Lockset
The Yale Accentra AU5305LN 626 is a commercial-grade lever lockset designed for storeroom doors that must remain locked from the outside at all times. It suits offices, schools and secure storage areas where key-only entry is required and free egress from inside is mandatory.
Heavy Duty Grade 2 Operation
Built from heavy gauge steel with a satin chrome finish, the lockset meets ANSI Grade 2 standards and UL listing for three-hour fire-rated doors. The mechanical storeroom function keeps the outside lever rigid so the latch only retracts by key, providing consistent security under repeated daily use.
Standard Commercial Installation
The lock fits doors 1 3/8 to 1 3/4 inches thick with a 2 3/4 inch backset and 2 1/8 inch crossbore, using the included 1 1/4 by 4 7/8 inch ANSI strike. Alignment of the latch and strike plate is critical; misaligned frames or incorrect door thickness are the most common causes of binding or latch failure.
Highlights
- Commercial-grade security backed by ANSI Grade 2 certification
- Storeroom function keeps exterior locked while allowing free egress
- Heavy-gauge steel construction resists wear in high-traffic areas
- Satin chrome 626 finish suits modern and traditional door styles
- Three-hour UL fire rating meets life-safety requirements
Specifications
| Brand | ASSA ABLOY ACCENTRA |
|---|---|
| Type | Door Hardware & Components |
| Style | 5300LN Augusta |
Questions about this item
Does the Grade 2 mechanical storeroom lever run silently or generate audible latch noise during continuous daily operation?
The heavy-gauge steel mechanism is purely mechanical with no electronic components, so it produces only the normal click of the latchbolt engaging — no motor or solenoid whine.
What door preparation must already exist for the 2 3/4 in backset and 2 1/8 in crossbore to fit without new drilling?
The lock requires a standard 2 3/4 in backset bore and 2 1/8 in crossbore; if your door already has those cutouts and a 1 3/8 to 1 3/4 in thickness, no new drilling is needed.
Will the 1 1/4 x 4 7/8 in ANSI strike align with an existing metal door frame prep, or does the frame need modification?
The included ANSI 117.1 strike matches the standard 1 1/4 x 4 7/8 in cutout used on most commercial hollow-metal frames, so it typically fits without frame changes.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



