We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Spool of shiny silk rose pink PLA filament 1.75 mm diameter 2.2 lbs

XZN Silk PLA Filament 1.75mm Silk Rose Pink 2.2 lbs

SKU CH-TP3T-MYEA7

1.75 mm silk-finish PLA on a 2.2 lb spool prints at 190–220 °C with ±0.02 mm accuracy for glossy, low-stringing models

  • ColorSilk Rose Pink
  • MaterialPolylactic Acid
  • Diameter1.75
  • Weight2.2 pounds
  • Ultra-gloss silk finish creates stunning decorative prints
  • +/-0.02 mm diameter tolerance ensures precise detailed models
  • Enhanced toughness with strong layer adhesion prevents warping
  • 24-hour drying and vacuum packing deliver clog-free printing
  • Prints at 190-220 °C with 40-60 °C heated bed

Product Identity

XZN Silk PLA Filament in Silk Rose Pink is a 1.75 mm polylactic acid spool weighing 2.2 pounds. It targets makers and hobbyists who want a glossy, silk-like surface finish on decorative prints, cosplay props or gift items without changing their standard PLA workflow.

Upgrade Context

The filament replaces standard matte PLA when visual impact matters more than purely functional strength. The jump is worth it for display pieces, festival decorations or costume parts where the ultra-gloss appearance justifies the slight premium over basic filament.

Sustained Behaviour

Mechanical winding and 24-hour drying before vacuum packing keep the spool feeding cleanly during long prints. Diameter tolerance of +/- 0.02 mm and recommended nozzle temperature of 190-220 °C with a 40-60 °C bed maintain consistent extrusion over extended sessions.

Highlights

  • Ultra-gloss silk finish creates stunning decorative prints
  • +/-0.02 mm diameter tolerance ensures precise detailed models
  • Enhanced toughness with strong layer adhesion prevents warping
  • 24-hour drying and vacuum packing deliver clog-free printing
  • Prints at 190-220 °C with 40-60 °C heated bed

Specifications

BrandXZN
ColorSilk Rose Pink
MaterialPolylactic Acid
Diameter1.75
Weight2.2 pounds

Questions about this item

What spool size and filament diameter does this 2.2 lb Silk Rose Pink PLA use?

The filament is 1.75 mm in diameter with a tolerance of +/- 0.02 mm and comes on a 2.2 lb spool.

What nozzle temperature and bed temperature should I set for the first layer?

Heat the nozzle to 190-220 °C and the bed to 40-60 °C; the filament has been dried for 24 hours and vacuum packed to prevent clogs.

How often should I replace the 0.4 mm nozzle when printing this silk PLA?

Silk PLA is more abrasive than standard PLA, so plan to swap the 0.4 mm nozzle after every few kilograms to keep the shiny finish consistent.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.